Hubsan Parachute Recovery System

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A87TZ

£73.99

Was £99.99

Save £26.00

About this product

Overview

  • Designed to be used with the Hubsan X4 Pro helping it to descend to ground slowly, limiting damaged caused by a high altitude fall
  • Has a separate battery which means that if the battery on the Hubsan X4 dies it will still be able to activate
  • Sensors detect when the orientation (tilt of the drone) is more than 80 degrees and automatically launches the parachute

Product overview

• Designed to be used with the Hubsan X4 Pro helping it to descend to ground slowly, limiting damaged caused by a high altitude fall
• Has a separate battery which means that if the battery on the Hubsan X4 dies it will still be able to activate
• Sensors detect when the orientation (tilt of the drone) is more than 80 degrees and automatically launches the parachute
• Reusable which allows you to use the parachute again and again, for extra peace of mind

What is this parachute recovery system used for?
This specially designed parachute, for the Hubsan X4 Pro, acts as a recovery system for when there is an aerial mishap or battery failure. Such an event would cause the drone to come crashing back to earth, but as soon as the sensors built-in to the system detects the tilt of the drone is more than 80 degrees, the parachute launches. Deploying in approximately half a second, the parachute ensures that the drone descends slowly back to the ground limiting any damage a high altitude fall would cause. It has a separate battery, which allows the parachute recovery system to activate independently of the battery life on the drone and can be reused multiple times.

Specification

Specification table
Spare part reference number H109S-27 (Parachute Recovery System)
Compatibility
Maplin Order Code Description
A36TN Hubsan X4 Pro Quadcopter Drone with 1080p Camera and 3-Axis Gimbal

Can this item be used on the X4 pro Low edition, which has a single gimbal camera?

Asked by: Peter
Yes, it only works on Hubsan h109s pro
Answered by: Derek
Date published: 2017-01-12

Will this work with dji phantom 3 ?

Asked by: Phantom
Unfortunately we are unable to guarantee full compatibility for this item in your intended application, as this is not the manner for which it was designed to be used.
Answered by: Dominic
Date published: 2016-03-22

Hi There, Reading Through Various Forums.. I Have A Dji Phantom Pro  I after protecting, against its Runaway etc I know it's Made and designed by Hubsan., But would  it be able to,be adapted to A Phantom3.. Any Ideas?!

Asked by: Paul
Dominic - The question was - Have you known anyone - NOT for your Guarantee or Permission - just a bit of advice. ..  I was asking if you knew - of anyone .??!! . Well now you Do know someone and Yes it Does work .. As I have Achieved it , and tested it.. It works perfectly with DJI Phantom 3 - Without any Cutting or Changing . Just a Few Cable Ties.. Etc. 
Answered by: Techman
Date published: 2016-03-20
  • y_2017, m_11, d_23, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_GB, sid_A87TZ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads