Icecrypt LNB Adapter Clip for Sky Satellite Dish mk4

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A89UL

£11.99

About this product

Overview

  • Converts the Sky Satellite dish Mk4 so it can be used with any standard universal 400mm LNB
  • Allows better quality reception on non-UK channels
  • Quick and easy to install

Product overview

• Converts the Sky Satellite dish Mk4 so it can be used with any standard universal 400mm LNB
• Allows better quality reception on non-UK channels
• Quick and easy to install
• Manufacturer Code: ICE40MMAD

What does this LNB Adapter Clip do?
This LNB Adapter Clip will convert the Sky Mk4 satellite dish (Zone 1 or Zone 2) so that it can be used with any standard universal 400mm LNB. The Sky Mk4 dish has been installed since 2009, if you need to replace the existing LNB for a universal LNB you will need to use this adapter as a Sky LNB has a smaller collar which is not standard, so if using a universal LNB this adapter will keep the LNB in place.

What can I expect when using the LNB Adapter Clip?
By using this adapter and an LNB of your choice it is possible to reduce the noise figure of the existing LNB and allow better quality reception, especially when the dish is being used for reception of non-UK channels (Hotbird, Astra 19 etc.). The adapter clip is quick and easy to install and only requires a small Phillips screwdriver.

Rated 3 out of 5 by from Wont' fit my dish Gave an average as I'm sure this item is fit-for-purpose (to use on a Sky satellite dish mk4 as it says on the tag), it's just unfortunate it appears my satellite dish may not be Sky. The gentleman at Maplin asked if it was for a Sky dish, I replied I didn't know - there are no id markings anywhere on it. I purchased this adapter along with a double LNB to swap over the existing single LNB. But the adapter clip is the wrong size for the metal arm coming out from the dish. Rather than sliding over as it is supposed to, it is the SAME SIZE as the metal arm and would break if I tried to force it. Note to self; not all adapters are the same, don't assume they are standardized, and write down the dimensions of the arm and choose accordingly.
Date published: 2017-09-06
  • y_2017, m_11, d_23, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_A89UL, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Specification
Box contents Mains adapter/collar assembly
Upper half ring of collar assembly
Locking Pin
Retaining Metric Bolt & Nut

can this also be used as a replacement for a ( damaged) standard sky mk4 lnb holder ie is the collar fitted with a sleeve that needs to be removed if to be used with a 40 mm lnb

Asked by: maxi
No, the sky LNB would be too loose in this.
Answered by: DaveB
Date published: 2017-06-20

Does this adapter allow for a quattro lnb to be fitted

Asked by: MikY
Yes, I am pleased to advise the item will support this use.
Answered by: Dominic
Date published: 2016-11-20
  • y_2017, m_11, d_23, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_GB, sid_A89UL, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads