Web only

ICY DOCK 2.5 Inch SATA/IDE Enclosure

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A29LQ


About this product


  • Fits standard 2.5" SATA / IDE SSD and HDD(9.5mm).
  • Lightweight constructions.
  • For use in 3.5" internal drive bay.

Product overview

• Fits standard 2.5" SATA / IDE SSD and HDD(9.5mm).
• Lightweight constructions.
• For use in 3.5" internal drive bay.
• Compatible with screw-less type HDD tray.
• Genuine Plug & Play functionality.
• Unique tool-less design for hassle free device and hard drive installation.
• Ideally designed for anti-vibration and heat dissipation.
• EZ Fit pins removable for use mounting screw or proprietary tray use.

Introducing the Icy Dock MB990SP-B Dual 2.5" to 3.5" SATA and IDE Solid State and Hard Disk Drive Converter. This dual bay drive bracket allows you to use two SATA or IDE SSD and HDD in an internal 3.5" drive bay in most standard cases. Since most cases are not set up to use 2.5" form factor, the MB990SP-B allows you to make a huge upgrade to your system with very little effort.

The bracket will fit most types of cases. Out of the box it can be used in both tool-less and standard cases. The EZ Fit pins on the sides of the bracket fit into most standard mounting holes, and are also removable to use either your case’s proprietary mounting brackets, or to use screws for a more secure fit.

The EZ FIT bracket is extremely lightweight and has an open air design for maximum air flow and cooling of the drives.

Most standard 2.5" IDE or SATA drives can be used due to the open back design, allowing use of direct connections to the drive, also giving the user flexibility to mix and match drives.

re A29LQ I understand that a 2.5 SATA Standard Drive will fit this Standard 3.5 caddy. Where does the conversion from the 39 pin parallel IDE to the different layout of the SATA take place ? Similarly the Power supply. Separate converter necessary?

Asked by: York 20
This doesn't convert the drive types, just allows for the mounting of two 2.5 inch drives in a 3.5 inch bay, leaving the connections exposed at the rear for connecting cables to. If you wished to convert from IDE to SATA, or vice versa, you would need to purchase an external conversion components such as the following; http://www.maplin.co.uk/p/ide-to-sata-or-sata-to-ide-adapter-n40hn http://www.maplin.co.uk/p/maplin-4-pin-male-molex-to-sata-power-extension-cable-a27nn
Answered by: Gareth
Date published: 2016-03-16
  • y_2017, m_12, d_14, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_A29LQ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb