ICY DOCK 4x2.5 Inch SATA 3 Enclosure

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A33LQ

£56.99

About this product

Overview

  • Fits 4 x 2.5" SATA I / II / III HDD/SSD.
  • Accommodates Drives with up to 15mm Height.
  • Fits 4 Drives into a Single 5.25" Device Bay.

Product overview

• Fits 4 x 2.5" SATA I / II / III HDD/SSD.
• Accommodates Drives with up to 15mm Height.
• Fits 4 Drives into a Single 5.25" Device Bay.
• 1 x 4 pin power connector to reduce cable connections.
• Status LED on Front for Each Drive.
• Full Metal EZ Slide Mini Tray System with Full Cage Design.
• Small Form Factor Perfect for IPC, Servers, and Small Form Factor Cases.
• Fan Power Switch Allow User to turn off the fans when using SSD.
• Dual 40mm Cooling Fans.
• Heavy Duty Full Metal Construction.
• Support SATA 6Gbps.
• Top Cover for the Tray Adds Extra Drive Protection.
• Active Power Technology – Device only power up if there are drive installed.

Introducing the Icy Dock MB994SP-4SB-1 Full Metal Quad Bay 2.5" SATA 6Gbps backplane for use in a single 5.25" device bay. The MB994SP-4SB-1 is predicated off the incredibly popular MB994SP-4S, while taking its general concept but, with a SATA only interface and adding the fan power switch. In addition, there is only one 4 pin power connector that will reduce the amount of cables required. The MB994SP-4SB-1 allows for many more users to use this backplane in their homes with the reduced cost. The dual 40mm cooling fans to in addition to the power switch for the fans allow for the best flexibility – Turn off when using SSD’s and on when using mechanical SATA hard drives. Furthermore, this device utilizes Active Power Technology, so that the device only power up if there are drives installed.

how many sata cables will it need ???

Asked by: kevin
You need four SATA data (5-Pin) cables from the enclosure to the motherboard if you have four SATA drives. That is, you need one SATA data cable per drive. You need one power cable from the enclosure to the power supply.
Answered by: MacNB
Date published: 2017-01-24

you must have at least 1 sata connector to connect to the pc ??

Asked by: kevin
That is correct, there is only one power input, but each drive bay has its own SATA connection for data transfer.
Answered by: Gareth
Date published: 2016-02-01
  • y_2017, m_11, d_17, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_GB, sid_A33LQ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads