Find similar products here

Kemo 12W Mono Amplifier Module

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A26JN

£26.99

About this product

Overview

Product overview

• Connect a live level audio device or pre-amplifier to a speaker
• Get 12W of sound for 4-16Ω speakers
• No parts to solder - just connect to your speaker and phono plug in
• Requires a 6-16V DC power supply (not included)

What can this module do?
Send line level sound to your speakers with this 12W amplifier (manufacturer code M032S). With one input channel this module is perfect for any mono audio device with a single phono output at line level like a pre-amp or mixing desk. Hear everything with a frequency range of 40Hz to 20kHz. Get up to 12W of sound (when using a 16V supply and a 4Ω speaker) and use a 4-16Ω speaker as an output. The small casing means that you can fit this 72mm x 36mm x 23mm module almost anywhere.

Is any assembly required?
No assembly is required with this module. All you need to do is connect up your power supply, input and output. This module has a built-in single phono audio input and a 2.5mm centre positive pin power jack. There are 280mm (approximately) leads to connect to your speaker as well.

What else can I do with this kit?
This is a great kit for those looking to link their audio equipment to their speakers to create their own sound system and even includes a volume control knob. The module would easily mounted inside a project if you take care not to block the inputs or outputs. This kit requires a 6-16V DC power supply (not included)

Specification

Operating Specifications

Analogue Inputs:

1 (single phono)

Analogue Outputs:

1 (bare wire)

Frequency Range:

40-20,000 Hz

Impedance:

4-16 ΩΩ

Temperature Range:

70 °C°C

Product Specifications

Soldering Required:

No

Dimensions & Weight

Width:

72mm

Depth:

36mm

Height:

23mm

Can I power this unit using a battery pack? If so, which one do I need to buy with it?

Asked by: Brettws
No this cannot be powered with a battery bank
Answered by: Dale
Date published: 2017-05-21

Hello, could you tell me if I need a pre amp with this amplifier, I intend to use it as a temporary amp in my jukebox while I source a suitable replacement. The jukebox is a record jukebox using old type diamond pickups. Thanks. John.

Asked by: John
Unfortunately we are unable to guarantee full compatibility for this item in your intended application.
Answered by: Dominic
Date published: 2016-05-04
  • y_2017, m_10, d_20, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_GB, sid_A26JN, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads