Web only

Kitronik Deluxe Stereo Amplifier Solder Kit - 3.5mm Jack Lead

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A52RJ

£9.99

About this product

Overview

  • Make a great amp with a 3.5mm Jack input, on/off switch and volume control
  • Create an amp with 1W output per channel and 2 channels
  • Medium difficulty to solder with 21 parts

Product overview

• Make a great amp with a 3.5mm Jack input, on/off switch and volume control
• Create an amp with 1W output per channel and 2 channels
• Medium difficulty to solder with 21 parts
• Requires a 9V battery or 12V power supply (not included)
• Designed and manufactured in the UK by Kitronik

What can I make with this kit?
With up to 1 watt output per channel and two channels, this great amp kit (manufacturer code 1041-JK) is a fun way to play music. An on/off switch, power LED and volume control are built into the 21 piece kit. Just plug into a 3.5mm stereo socket (a standard small headphone socket) and listen to your music. This kit requires a DC 2-15V power supply, a single 9V(PP3) battery (not included) or a DC 12V power supply (not included) are recommended.

What is included in this kit?
Learn about electronics and circuits and practice soldering with this kit. The kit uses resistors, capacitors, potentiometers, LEDs, microchip and speakers. Learn how they are connected in a circuit and get practical experience soldering them. Use the components to create this amplifier and see how they come together in a circuit. The kit amplifies the voltage and current of the input signal with the amplifier integral chip (a NJM2073D chip) and the potentiometer (or variable resistor) works as a volume control. The signal is then transferred to the speakers which translate it into sound. This kit requires soldering and may require wire cutters.

How difficult is this to solder?
This is a medium level of difficulty to solder, ideal for novices that want to challenge themselves or those with some experience. The kit comes with two 8 ohm 66mm speakers and a 3.5mm jack lead. You can build your own enclosure (not included) to protect the electronics and make your own audio system.

Specification

Operating Specifications

Impedance:

8 ΩΩ

Product Specifications

Soldering Required:

Yes

Dimensions & Weight

Width:

62mm

Depth:

50mm

How long is the speaker cable in this pack? Many thanks Jonathan.

Asked by: mums help needed
This detail is included in the instructions provided for you on the product listing. You can find this under the downloads tab or by clicking this link. https://maplindownloads.s3-eu-west-1.amazonaws.com/A52RJUser-Manual-1829.pdf Step 9 explains this in detail but to summarise 1 metre of cable is provided which can be cut to whatever length you desire but would be maximum of 50 cm per speaker.
Answered by: Les
Date published: 2017-05-08
  • y_2017, m_12, d_14, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_A52RJ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads