Web only

Kitronik Mono Amplifier Solder Kit - 3.5mm Jack Lead

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A11RJ

£8.99

About this product

Overview

  • Make a great mono amp with a 3.5mm jack input
  • Create an amp with 1.25W output per channel and 1 channels
  • Simple to solder with 13 parts

Product overview

• Make a great mono amp with a 3.5mm jack input
• Create an amp with 1.25W output per channel and 1 channels
• Simple to solder with 13 parts
• Requires a 9V battery or 12V power supply (not included)
• Designed and manufactured in the UK by Kitronik

What does the kit make?
Listen to any device with a 3.5mm mono jack socket with this amplifier kit (manufacturer code 1054). Just plug into a 3.5mm mono socket (a standard small headphone socket) with this 13 piece kit and hear your mic. This kit can output up to 1.25 Watt on its single channel. This kit requires a DC 4-12V power supply, a single 9V (PP3) battery (not included) or a DC 12V power supply (not included) are recommended.

What is in this kit?
Learn about electronics and circuits and practice soldering with this kit. The kit uses resistors, capacitors, a microchip and a speaker. Learn how they are connected in a circuit and get practical experience soldering them. Use the components to create this amplifier and see how they come together in a circuit. The kit amplifies the voltage and current of the input signal with the amplifier integral chip (a LM386 chip) control. The signal is then transferred to the speaker which translates it into sound. This kit requires soldering and may require wire cutters.

How difficult is this to solder?
This is a good kit for novices and those with some knowledge of electronics. The kit comes with one 8 ohm 66mm speakers and 3.5mm mono jack lead. You can build your own enclosure (not included) to protect the electronics and make your own microphone speaker system.

Rated 5 out of 5 by from An excellent kit at a bargain price! Brilliant kit - easy to solder, good, clear instructions. Does the job well.
Date published: 2016-08-20
  • y_2017, m_11, d_18, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_A11RJ, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Operating Specifications

Impedance:

8 ΩΩ

Product Specifications

Soldering Required:

Yes

Dimensions & Weight

Width:

45mm

Depth:

35mm

Can this kit be used instead of the DIY Speaker Kit for the BBC Micro:bit?

Asked by: LeonL
Unfortunately we are unable to guarantee full compatibility for this item in your intended application I am sorry for any inconvenience this may cause you.
Answered by: darren cordon
Date published: 2017-01-31

when using this product, would it be possible to use multiple speakers?

Asked by: bobfish
Unfortunately we are unable to guarantee full compatibility for this item, as this is not the manner for which it was designed to be used.
Answered by: Dominic
Date published: 2017-01-19

can you put a swich in the battery lead

Asked by: petrol head
It would be possible, however we could not advise on product modification.
Answered by: Gareth
Date published: 2016-04-27

can I substitute the jack lead and speaker for jack sockets....jack lead becomes input, speaker becomes out or will that not work

Asked by: bodger1
As this is supplied as a kit you are free to make any modifications to the build that you wish. We are sorry but we are unable to comment on any modifications, project or circuit design.
Answered by: Les
Date published: 2015-07-17
  • y_2017, m_11, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_GB, sid_A11RJ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads