Find similar products here

Large High Impact Case With Pre Cut Foam Interior

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N14GR

£49.99

Our delivery options

Free standard delivery (orders over £10)
3-5 working days 9am-5pm
FREE
Standard delivery (orders under £10)
3-5 working days 9am-5pm
£2.99
Next day delivery
Mon - Fri, order by 6pm
From £5.99
Specific day/time delivery
Choose am / pm OR before 9am / 10.30am
From £5.99
Same day delivery with Shutl
Choose a 1 hour time slot
Prices vary

Specific options for this product are available in the checkout. Read more delivery information

About this product

Overview

  • Keep your valuables safe in this robust, water resistant case
  • Supplied with two pieces of customisable pre-cut foam
  • Tough exterior that ensures contents are protected

Product overview

• Keep your valuables safe in this robust, water resistant case• Two pieces of pre-cut foam enable you to customise the interior to suit your specific needs• Tough exterior that ensures contents are protected

With our Large High Impact Case you can safely store and transport your valuable equipment or parts. It’s tough exterior and airtight valve keep the case completely water resistant , meaning you’ll never worry about them getting damaged or wet. Its inside contains two pieces of foam which you can easily mould around the shape of your valuables, so you can completely customise the inside to suit your needs!

Rated 5 out of 5 by from I've used this as a Topcase for a scooter in London for 4 years. I use it to carry my laptop so the foam is great and it's just big enough for 2 bags of groceries. I added extra large fender washers where I drilled out the back to bolt it to the luggage rack as I was afraid it might rip or the top might crack due to UV exposure but it's held up just fine. I've even had two crashes on the bike (one that totally smashed the windscreen) and the case only had minor scratches despite taking most of weight of the bike. I can report that after 4 years of heavy daily abuse it has FAR exceeded my expectations!
Date published: 2014-11-11
Rated 5 out of 5 by from A great case for the price. Compares well to other far more expensive polycarbonate cases. Has easier catches to undo too! Doesn't pop open either when sat or stood on, like can happen with some of the other more expensive cases. I currently have 4 and have well over ?ъ10k worth of gear in them. Pick and pluck foam is as good as it is in any case, you either love it or hate it. Personally I don't mind it does the job and is easy enough to shape round equipment. Little tip get some multi purpose glue and glue the layers together after plucking this will stop it fragmenting with time (don't use superglue). Soon to buy more when the come on maplin regular great sale price point.
Date published: 2014-11-11
Rated 5 out of 5 by from Astounding value for money. I have genuine Pelican cases (of which this is a copy), which whilst are superior in design and manufacture, are nearly 10 times the price. I bought this to store very expensive camera equipment in, and wouldn't do so unless this case was of very good quality. A version with velcro adjusting dividers would be great, as the only option currently has a diced foam interior. Highly recommended.
Date published: 2014-11-11
Rated 5 out of 5 by from I bought a pair of these as an alternative to fitting regular motorcycle pannier cases costing many times the price. The Maplin product represents excellent value for money and I'm confident will be quite capable of handling the general wear and tear normally associated with motorcycle luggage. The fact the cases may be secured with padlocks is an additional bonus. I've removed the foam inserts only to discover the internal layout also provides for case dividers should they be required. At this point in time, I'm unable to comment on the cases' waterproof gaskets' ability to resist water ingress whilst fitted to the motorcycle, therefore I'll protect the contents in separate waterproof bags until I'm certain the cases are water resistant.
Date published: 2014-11-11
Rated 4 out of 5 by from Hi there i bought one of these to protect my canon EOS 500D as well as battery gtip tripod filters etc and its perfect it is within the required dimentions for hand luggage on Airlines it is extremely study and perfect for protecting valuble equipment the one drawback is no secure lock like a combination lock but thats to be expected on a case of such little price its a perfect case for protecting cameras and other valuble quipment as it will not rattle around at all although i would not trust putting it in the hold of an aircraft simply because of its lack of secure lock so based on all aspects if it was on price and quality alone it would have 5* but for my use it needs a lock and shoulder strap so its 4* from my perspective but if your needs do not involve the need for a lock or shoulder strap then it is absolutely perfect and 5*
Date published: 2014-11-11
Rated 5 out of 5 by from Amazing value These are so good I've got three of them. Compared to a peli case (cost £250) these are of similar build and quaility. I can't find anything near this for the price anywhere else. It comes with 'pluck' foam so u just pluck out the bits u don't want to fit your items in nice and snug. Size wise I can fit 2 x dslr cameras in one with room to spare. The bonus being they stack on top of each other so can be easily transported together. Don't waste £200 by getting a peli. Get these!
Date published: 2016-07-03
Rated 5 out of 5 by from amazing case, great for protecting all my camera gear. very durable and of very high quality, reasonably priced too! great product
Date published: 2014-11-11
Rated 5 out of 5 by from Really well constructed, invaluable in helping to protect all my expensive photography equipment whilst on the road.
Date published: 2014-11-11
  • y_2017, m_12, d_16, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_43
  • loc_en_GB, sid_N14GR, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Top lid: 1 piece of wave foam
Bottom lid: 2 pieces of pre-cut foam and 1 piece of wave foam
Dimensions (W x D x H)mm: External - 515 x 415 x 200
Internal - 485 x 355 x 186
Weight: 4.19kg

What is the diameter of the padlock / loop holes?

Asked by: 07734
Unfortunately we do not have this information, but we will request a unit from stock and update you shortly.
Answered by: Billy
Date published: 2017-12-04

Code: N14GR, can you buy replacement foam

Asked by: linval
On this occasion, Maplin does not stock a product that exactly meets your requirements, or indeed anything close enough to offer you as an alternative.
Answered by: Dominic
Date published: 2017-10-13

Do you by any chance ship to the US? Alaska to be exact

Asked by: Kyang
Unfortunately we do not ship outside the UK.
Answered by: darren cordon
Date published: 2017-06-16

Is the lid removable?

Asked by: Nigel
No this can't be removed.
Answered by: Dominic
Date published: 2017-05-14

Can I get replacement foam inserts for this case,as I need to change the cameras accessories I need to keep safe

Asked by: Bob h
Unfortunately i am sorry but the item in question doesn't support use in you intended application.
Answered by: Billy
Date published: 2017-04-24

hi, this case comes with 4 layers of foam. 1x thin egg crate, 2x pick and pluck and 1x thick egg crate in the lid. What are the thickneses of each sheet please?

Asked by: toorgmai
Unfortunatley the manufactures have not given this measurment. I am sorry for any inconvenience this may cause you.
Answered by: darren cordon
Date published: 2017-03-15

What are the thicknesses of the layers of foam that this product comes with?

Asked by: Phil
These are roughly 10cm blocks that can be taken out in layers or by blocks one at a time.
Answered by: darren cordon
Date published: 2017-03-15

Is this case airtight? I am trying to transport chemical vials abroad on cargo and the pressure causes leakage when not in completely airtight containers.

Asked by: ZHong
No, I am sorry but the item will not work for this use.
Answered by: Dominic
Date published: 2017-02-19
  • y_2017, m_12, d_16, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_en_GB, sid_N14GR, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads