LDG AT-200 PROII Antenna Tuner

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: R52BD


This item is delivered directly from the supplier which may affect delivery dates.

About this product


  • 5 to 250 watts SSB and CW. (100 watts on 6M)
  • Easy to read LED bargraph display for RF power, SWR and status
  • 16,000 3D memories for instantaneous band changing

Product overview

5 to 250 watts SSB and CW. (100 watts on 6M)••Easy to read LED bargraph display for RF power, SWR and status• •16,000 3D memories for instantaneous band changing• •Two position antenna switch with memories for four antennas on each position• •Tuning time: 0.5 to 6 seconds full tune, < 0.1 second memory tune• •Built in frequency counter for memory operation• •Frequency coverage: 1.8 to 54.0 MHz• •Tunes 6 to 1000 ohm loads (16 to 150 ohms on 6M), 6 to 4000 ohms with optional 4:1 Balun• •For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna• •Optional external Balun allows tuning of random length, long wire or ladder line fed antennas• •Optional interfaces for Icom and Yaesu available• •Power requirements: 11 to 16 volts DC at 750 mA max during tuning•

Today, more and more transceivers feature 200 watts output. Even though many of these modern radios feature a built-in tuner, it's range and features are usually quite limited; if you need a tuner, you probably need a better one than they built into the radio. The LDG AT-200 is designed for this new generation of rig. It's specifically reccomended for Ten-Tec and tube radios The AT-200 will handle up to 250 watts SSB or CW on 1.8 - 30 MHz, and 100 watts on 54 MHz. It features LDG's state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-200 with longwires, random wires and antennas fed with ladder line with the optional LDG balun

Does this tuner include the ICOM interface cable?

Asked by: Roger
No it does not.
Answered by: Les
Date published: 2016-11-15
  • y_2017, m_12, d_14, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_R52BD, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb