LDG IT-100 Antenna Tuner

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: R52BP

£178.99

This item is delivered directly from the supplier which may affect delivery dates.

About this product

Overview

  • 0.1 to 125 watt power range (SSB and CW), 100W on 6M
  • 2000 memories for instantaneous band changing
  • Controlled from Icom Tuner button on radio or Push button on Tuner

Product overview

0.1 to 125 watt power range (SSB and CW), 100W on 6M••2000 memories for instantaneous band changing••Controlled from Icom Tuner button on radio or Push button on Tuner••Compatible with any Icom radio that is AH-4 or AH-3 compatible (6M tuning from Tuner button for radios that are only AH-3 compatible)••Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune••1.8 to 54.0 MHz coverage. Built-in frequency sensor••Tunes 4 to 800 ohm loads (16 to 150 on 6M) 4 to 3200 ohms with optional 4:1 Balun••For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna••Optional external Balun allows tuning of random length, long wire or ladder line fed antennas

The IT-100 is the ideal tuner for your new IC-7100. First, it matches up to 10:1 SWR (3:1 on 6 meters), so just about anything you can feed with coax is good to go. And, it has 2,000 (not a typo; that's 2,000!) memories, enough for every Dxpedition, RTTY spot and radio buddy you've got, and then some. Just hit the tune button on the radio, and your IT-100 will set tuner parameters in less than a second if you've been there before. If not, it kicks off a full tuning cycle that will be over in about 3 seconds. Don't need the tuner just now? Then just tap the Tune button briefly, and the tuner goes into bypass. Press it again to bring the tuner back on line -- it's just that simple

Downloads