LDG KT-100 Antenna Tuner

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: R52BL


This item is delivered directly from the supplier which may affect delivery dates.

About this product


  • 0.1 to 125 watt power range (SSB and CW), 100W on 6M
  • 2000 memories for instantaneous band changing
  • Controlled from Kenwood Tuner button on radio

Product overview

0.1 to 125 watt power range (SSB and CW), 100W on 6M••2000 memories for instantaneous band changing• •Controlled from Kenwood Tuner button on radio••Powered from Kenwood radio••Works with any Kenwood radio that is AT-300 compatible••Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune• •1.8 to 54.0 MHz coverage•Built-in frequency sensor••Tunes 4 to 800 ohm loads (16 to 150 on 6M) 16 to 3200 ohms with optional 4:1 Balun• •For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna. •Optional external Balun allows tuning of random length, long wire or ladder line fed antennas

LDG's new KT-100 serves as a dedicated tuner for Kenwood radios: just press the Tune button on the radio. The LEDs on the front panel indicate tuning status, and will show a match in seconds, or even less of you've tuned on or near that frequency before; the KT-100 has 2,000 memories for instant recall of the tuning parameters for your favorite bands and frequencies If you have an AT-300 compatible Kenwood radio, you can simply plug the KT-100 into your transceiver with the provided cable; the interface powers the tuner, and the Tune button on the radio begins a tuning cycle. The supplied interface cable makes the KT-100 a dedicated tuner for most modern Kenwood transceivers. There are no extra cables to buy Flexible, low cost, easy to use and just right for your Kenwood transceiver, the KT-100 is the latest in a long line of automatic tuners from LDG that fit in right were you need them the most