Find similar products here

LM2940CT-50 NSC 1A Low Dropout Regulator

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: AV22Y

£2.29

Our delivery options

Free standard delivery (orders over £10)
3-5 working days 9am-5pm
FREE
Standard delivery (orders under £10)
3-5 working days 9am-5pm
£2.99
Next day delivery
Mon - Fri, order by 6pm
From £5.99
Specific day/time delivery
Choose am / pm OR before 9am / 10.30am
From £5.99
Same day delivery with Shutl
Choose a 1 hour time slot
Prices vary

Specific options for this product are available in the checkout. Read more delivery information

About this product

Overview

  • Sources 1A of output current with a dropout voltage of 0.5V and maximum of 1V
  • Quiescent current reduction circuit making quiescent current only 3mA
  • Protected from reversed battery installation

Product overview

  • Sources 1A of output current with a dropout voltage of 0.5V and maximum of 1V
  • Quiescent current reduction circuit making quiescent current only 3mA
  • Protected from reversed battery installation
  • Shuts down during line transcients to protect internal circuits and the load
  • Thermal overload and short circuit protection

 

A positive voltage regulator that can source 1A of output current with a dropout voltage of typically 0.5V and a maximum of 1V, over the entire temperature range.

A quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V.

The quiescent current with 1A of output current and an input-output differential of 5V is therefore only 3mA. Higher quiescent currents only exists when the regulator is in the dropout mode (VIN - VOUT = 3V).
Also designed for vehicular applications, the device, and all regulated circuitry, is protected from reversed battery installation, or double-battery ‘jump-start’ scenarios.

During line transients, such as load dump where the input can temporarily exceed max. VIN, the device will shut down to protect its internal circuits and the load.

It cannot be harmed by temporary mirror-image insertion. Thermal overload and short-circuit protection is included.

Specification

Specifications:
Output voltage: 5V typical ±0.15V max.
Line regulation: 20mV
Load regulation: 35mV
Output impedance: 35mW
Quiescent current: 10mA max.
Output noise: 150µV rms
Ripple rejection: 72dB min.
Long term stability: 20mV/1000 hrs
Dropout voltage: 0.5V min.
Maximum input voltage: 26V
Operating temperature range: 0°C to +125°C

What is the output voltage?
Asked by: Alex Savidis
5 volt.
Answered by: GM
Date published: 2016-02-29

What is the minimum input voltage to get a constant 5v out?
Asked by: Ralph Jonson
5.5 volt
Answered by: PW
Date published: 2016-02-29
  • y_2017, m_12, d_10, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_GB, sid_AV22Y, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads