Find similar products here

Lorex 1080p 8 Channel 1TB DVR and 4 Camera CCTV Kit

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A16XT


Was £343.99

Save £94.00

Our delivery options

Free standard delivery (orders over £10)
3-5 working days 9am-5pm
Standard delivery (orders under £10)
3-5 working days 9am-5pm
Next day delivery
Mon - Fri, order by 6pm
From £5.99
Specific day/time delivery
Choose am / pm OR before 9am / 10.30am
From £5.99
Same day delivery with Shutl
Choose a 1 hour time slot
Prices vary

Specific options for this product are available in the checkout. Read more delivery information

About this product


  • Eight channel DVR with four cameras that record in 1080p Full HD
  • SmartIR Night vision up to 130ft (40 metres) in ambient lighting allows you to monitor through the night
  • Weatherproof, can be used both indoors and outdoors (IP66 Rated)

Product overview

• Eight channel DVR with four cameras that record in 1080p Full HD
• SmartIR Night vision up to 130ft (40 metres) in ambient lighting allows you to monitor through the night
• Weatherproof, can be used both indoors and outdoors (IP66 Rated)
• Digital noise reduction (DNR) for clear accurate images
• ClearNight imaging gives you better low light performance and improved recording efficiency
• Split glass design minimises IR reflection
• 83-degree field of view allows you to see a wider image and more of what’s happening
• Vandal resistant design with cable pass-through bracket
• Versatile ceiling or wall mounting options
• Residential and business friendly compact design
• Expandable by up to four more cameras
• Records onto a 1TB security grade SATA HDD which can be easily upgraded up to a maximum of 6TB
• Option to switch between continuous, scheduled and motion recording
• H.264 video compression reduces data bandwidth requirements for efficient data storage and reduced network load for easy remote connectivity
• Click and drag digital zoom both in live view and playback
• Instant USB backup of live video from individual cameras
• Automatic firmware updates over the internet to ensure your system is safe and secure
• FLIR Secure app can be set up in three steps and allows you to view all your cameras and systems from any iOS or Android device
• Optional motion push notifications and email alerts
• Model number: LHA21081TC4P
• DVR: LHA21081T
• Camera: LAB223B

High Definition CCTV System
This Lorex 1080p 8 Camera CCTV kit is a great way to protect your home or business and monitor them remotely. It features four 1080p full HD weatherproof cameras that can be used both indoors and outdoors. With intelligent night vision and an 83-degree field of view, you can peace of mind that your home or business is under the watchful eye of your cameras.

Smart Long Range Night Vision
The Cameras in the Lorex LHA21081TC4P CCTV kit come with top of the line long range night vision technology. The infrared LEDs around the sensor give you unparalleled performance in the dark, with a clear view up to 40 metres in regular night-time conditions and 27 metres in total darkness. There is also an embedded IR cut filter that turns on and off between day and night, to give you better colour in all lighting conditions. The cameras also feature a SmartIR feature that gives you better close-up recognition in the dark. Using this feature it will be easier to make out faces that are up close to the camera compared to others that make it hard due to the level of IR light shining off the persons face.

How can I record and monitor with this CCTV kit?
This CCTV kit records directly to the pre-installed security grade hard drive. You can customise how you want the footage to be saved, so you can either choose between continuous, scheduled and motion recording. Continuous recording records constantly and automatically loops over old recordings should your drive get full. This is a great option for businesses or people with a varied home schedule. Scheduled recording allows you to only record when you want to. For example, when you are not at home or if you are going away for a while. Motion recording is triggered when any of the connected cameras in your system detect movement. This is perfect if you only want to see footage of specific events and don’t want to record a bunch of nothingness.

Remote Viewing with FLIR Secure
If you are away from home but want to keep an eye on what is going on you can do so quite simply by connecting your systems DVR to your router and configuring the app. You can set the app up in three easy steps and then view the footage being streamed from your CCTV system anywhere with an internet connection. The app is available on both iOS and Android, and it can send you push notifications when there is an alert so you are up to date throughout the day.

Rated 5 out of 5 by from Easy set up and great quality! Just set this all up now and it’s absolutely superb. Was a little unsure about the weather resistant plugs so rather than leave them to the elements I installed IP44 junction boxes to house the connections to prevent any unwanted issues. DVR runs very quickly and doesn’t seem to have much lag. Very easy to use! I’ve installed the app on iPhone and IPad now and it is absolutely amazing! Can’t recommend enough, have room to expand for four more cameras too. Buy it you won’t regret it.
Date published: 2017-10-30
Rated 4 out of 5 by from First CCTV installation I brought this as Id been toying with installing CCTV to my property for about 18 months. The camera spec and HD size were important to me, as was the ability to access the system from an iphone Collected on Friday morning and installed by Saturday night. You have to plan for cable-routing and camera positions. I had to consult my wife as Id have got it wrong and all 4 were going outside. I wanted to limit holes in the house, so installed it in my garage- this meant getting a LAN out there as it HAS to be wired, not wireless. Getting 4 sets of camera cable and a LAN wire (CAT5e) requires a 25mm hole through the double-skin 9'' bright wall. Tip- to get all the wires through, as they will snag on the bricks- cut a 6'' piece of plastic conduit- which is 20mm diameter, Feed the cables into it, one by one and prevent them coming out the end- then just push the plastic conduit and the cables through the hole and once all in the wall and out the other side- its easy! Make a loom up by taping the cables together (even though they will be different lengths) as it will make handling/securing the loom easier. Id jury-rigged my system before i installed it- I put 2 cameras up, plugged it all in and connected a temporary LAN feed to the DVR and followed the instructions to update the firmware- so i know knew it worked. Im a lift engineer- so I'm used to cables, electronics, computers- but didn't be put off- its not difficult. The software interface is linux-based and only does what it says. The basic setup instructions are fine- but backing up recordings is not straight forward until you have done it- i.e., save video to a USB stick (the stick doesn't appear in devices- so you are not sure that you are backing up to it...) But it does work, it rained first night and was still working the next day! Im happy with the system- only drawback may be the 9 days capacity if you needed to review while you were away for 2-weeks, then you would be abided to go for a bigger drive (2TB?) Id recommend the system- the night vision is good, but in black and white- in case thats not obvious. The lighting level is good, the cameras show an array of RED LEDs of a night but you will NOT be able to read registration plates off cars- as the reg plate bounces the LED lighting and it appears as a white blank.
Date published: 2017-09-03
Rated 5 out of 5 by from Great system Easy to install easy to set up and comes with all wiring
Date published: 2017-09-16
Rated 5 out of 5 by from Excellent Great piece of kit highly recommend this product .
Date published: 2017-10-31
  • y_2017, m_11, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_4
  • loc_en_GB, sid_A16XT, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb


Operating Specifications

Video Input:


Video Output:


Audio Input:

Single Phono (RCA)

Audio Output:

Single Phono (RCA)

Internal Memory Capacity:

1 TB

Number Of Simultaneous Video Outputs:


Number Of Channels:


Number Of USBs:



Number Of Included Cameras:





Camera Type:


Image Specifications

Maximum Resolution:


Display Specifications

Maximum Display Resolution:


Product Specifications

PTZ Controller:


Recording Modes:

Motion Detect

Mouse Compatible:


Motion Detection:


Remote Monitoring:


Number Of Recording Modes:


Camera Specifications

Camera Connections:


Image Sensor:


Lens Size:

3.6 mm

Variable Viewing Angle:


Viewing Angle:


Night Vision Distance:


Effective Night Vision Distance:


IR Cut Filter:


Built-in Audio:


Indoor / Outdoor:


Camera Operating Temperature:

-30 - 60°C

Minimum Illumination (IR On):


Minimum Illumination (IR Off):


Number Of Infra-Red LEDs:


System Requirements & Software

Compatible Operating Systems:

Windows & Mac OS

Minimum System Requirements:

CPU Core 2 Duo 3.0GHz
Windows 7/8
2GB RAM or greater
512 MB of video memory
Network (LAN) 10/100 BaseT Network
1 Mbps upload

Software Included:


Power Specifications

Recorder Power Supply:


Camera Power Supply:



Construction Material:


Camera Housing Colour:


Cable Included:


Included Cable Length:


Cable Colour:


Dimensions & Weight

DVR Width:


DVR Depth:


DVR Height:


Camera Width:


Camera Depth:


Camera Height:


Camera Weight:



Package Contents:

8 CH DVR with Pre-Installed HDD
1 x HDMI Cable
1 x Remote Control
1 x Power Adapter
1 x Mouse
1 x Ethernet Cable
4 x 1080p HD Bullet Cameras
4 x 18 metre BNC/DC cables
4 x Mounting kits
4x EU/UK/US Power Adapters
Quick Setup Guides

Hi. Installed this cctv system just over a year ago and everything has been fine. However about a week ago all my cameras stopped working. Just a blank screen but still shows date and time. Also the red lights don't appear on the cameras anymore. Help. 

Asked by: Craig 1974
This sounds like a faulty power supply to the cameras.
Answered by: Dominic
Date published: 2017-11-16

Do you need a continuous connection to the router via an Ethernet cable in order to use the app?? Or is the system wireless?

Asked by: Richie
To use the app they would need the ethernet cable to be connected.
Answered by: Dominic
Date published: 2017-11-06

When I enquired in store I was told that Maplin could arrange installation. Is this still possible on line or do I need to go to one of your stores ?

Asked by: Mike
Answered by: darren cordon
Date published: 2017-10-29

Can the 18 metre cable range be extended in one or two of the cameras to about 35 meters? 

Asked by: Davefabo
Yes, that would be fine to do.
Answered by: Billy
Date published: 2017-10-29

Can this also be used as a stand alone unit connected to the tv? Or does it need a computer to run it?

Asked by: Russell
You do not need a computer or internet connection to use this. it can be connected directly to your TV and used that way.
Answered by: Dale
Date published: 2017-10-27

Could you tell me if its black or white leads running from the cameras to unit please?

Asked by: Russell
This comes with black cables.
Answered by: Dale
Date published: 2017-10-27

I have this system bought from maplin...can I upgrade one or more of the cameras to higher pixel quality?

Asked by: Andy
This system can only host up to 1080p resolution cameras.
Answered by: James
Date published: 2017-10-16

What type of system is this.  i.e. is it TVI, CVI, AHD

Asked by: Andy
This is a AHD system.
Answered by: Russell
Date published: 2017-10-12
  • y_2017, m_11, d_20, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_27
  • loc_en_GB, sid_A16XT, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb