Find similar products here

Low Cost Miniature Microswitch with Lever

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: GW69A

£1.79

Our delivery options

Free standard delivery (orders over £10)
3-5 working days 9am-5pm
FREE
Standard delivery (orders under £10)
3-5 working days 9am-5pm
£2.99
Next day delivery
Mon - Fri, order by 6pm
From £5.99
Specific day/time delivery
Choose am / pm OR before 9am / 10.30am
From £5.99
Same day delivery with Shutl
Choose a 1 hour time slot
Prices vary

Specific options for this product are available in the checkout. Read more delivery information

About this product

Overview

  • Miniature microswitch with lever
  • Switch is a single-pole double-throw with a choice of actuators attached
  • Terminals are standard solder lugs

Product overview

  • Miniature microswitch with lever
  • Switch is a single-pole double-throw with a choice of actuators attached
  • Terminals are standard solder lugs
  • The actuator is a stainless steel 16.5mm long lever

A low-cost miniature microswitch produced to an internationally accepted standard size and operating characteristics. The switch is manufactured from glass-reinforced thermoplastic to give rugged performance. Switch is a single-pole double-throw and available with a choice of actuators attached.Terminals are standard solder lugs. The actuator is a stainless steel 16.5mm long lever.

Specification

Construction

Fixing Hole:

2.35mm

Fixing Centres:

9.5 mm

Dimensions & Weight

Width:

19.8mm

Depth:

10.2mm

Height:

6.4mm

Hi, Is this microswitch or any of your other similar microswitches suitable for 240Vac operation, and if so at what breaking current please.

Asked by: Chas
On this occasion Maplin do not stock a product that exactly meets your requirements, or indeed anything close enough to offer you as an alternative.
Answered by: Russell
Date published: 2017-10-12

Is there an datasheet available for these switches that you can link?

Asked by: Mark
The datasheet is available here: http://52.50.15.149/Downloads/datasheet-10873
Answered by: Dale
Date published: 2017-11-15

Which is the positive, negativw and earth. On the switch it says 1,2,3 only. Thanks

Asked by: eric
The three terminals would correspond to a common, normally open and normally closed, you would have no dedicated positive, negative and earth on a switch as it is just covering a break in the power line. The common would be the incoming signal so could be considered closest to a positive. Normally closed would provide a live output until the switch is activated, at which point it would break the connection and normally open would be the reverse of this. The common would usually be marked as the one, followed by normally open and then normally closed, however we would recommend checking with a multimeter before making permanent connections.
Answered by: Gareth
Date published: 2017-03-14

can this switch be used as a replacement for an omron d2fc-f-7n

Asked by: jack
Unfortunately we are unable to guarantee full compatibility for this item in your intended application.
Answered by: Dominic
Date published: 2016-04-13

Hi the switch I am replacing says it is a '6a 250 vac' will this be suitable as a replacement?
Asked by: Vicky
No sorry this product does not support that.
Answered by: JK
Date published: 2015-07-17

Hi, Are you quite sure of the dimensions you have given for the Minature Microswitch?
Asked by: jondav
19.8 x 10.2 x 64mm - I will get the page changed
Answered by: JK
Date published: 2015-07-17
  • y_2017, m_11, d_21, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_GB, sid_GW69A, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads