Web only

Find similar products here

Lynteck TW402 Additional Wired PIR Sensor

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N48CL

£12.99

About this product

Overview

Product overview

• Wired for a reliable and more secure signal
• Single wired PIR motion detector sensor
• Detects intruders up to 15m away
• Compatible with LS400, LS800S and LS5000 alarm kits

Special Features
• Sensors shape gives it immunity to white light

What will my PIR detect?
The Lynteck TW402 Additional Wired PIR Sensor has a range of up to 15m and is immune to white light, within that distance if it detects movement then the control box will be alerted which in turn activates the siren. The best placement for the Lynteck TW402 Additional Wired PIR Sensor is in corners of rooms an intruder would need to travel for example, a kitchen, entrance hall or landing. With the wired PIR sensor if the sensor is tampered with or the wire are cut it automatically triggers the alarm for an extra layer of security.

Easy to Setup and Ready to Go
The Lynteck TW402 Additional Wired PIR Sensor are quick and easy to set up and wire into the control box. The PIR sensor runs off the power from the control box and because it is a wired signal it cannot be blocked or jammed. The Lynteck TW402 Additional Wired PIR Sensor is compatible with LS400 (Order Code N47CL), LS800S (Order Code N51CL) and LS5000 (Order Code N50BH) alarm kits.

Compatible with:
Lynteck LS400 Wired Intruder Alarm Kit N47CL
Lynteck LS5000 Wireless Intruder Alarm Kit L50BH


Rated 4 out of 5 by from i was pleased with the pir but unfortunely it did not work with my intellisense panel [ bought feb 03 ] and have since bought the pir for the job.this one works fine.
Date published: 2017-04-07
  • y_2017, m_10, d_21, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_N48CL, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Will this pir work on a 4 core wired system, two are the 12 volt power and the remaining two are tamper system wires

Asked by: Dennis
This is a 2 wire PIR ... no tamper circuit.
Answered by: Les
Date published: 2016-12-13

how to connect to melcom st5000

Asked by: victor
Full instructions for this are available in the link below. https://maplindownloads.s3-eu-west-1.amazonaws.com/N47CLN48CLN49CLUser-Manual-2940.pdf
Answered by: Darren
Date published: 2016-11-21

Is this sensor tamper proof?

Asked by: Pete
The provided datasheet for the device indicates that it does have tamper protection. (You would need to connect the extra 2 tamper wires to your alarm system)
Answered by: Les
Date published: 2016-11-04

What is the detection angle of the sensor. What is meant by additional, in other words would this sensor replace an existing faulty sensor .

Asked by: Snowy
The detection angle is 110 degrees, and this could be used as a replacement for a faulty sensor or as an additional sensor to expand a wired alarm system if additional connections are available.
Answered by: Gareth
Date published: 2016-08-26

is this compatible with the Optima range of alarms

Asked by: Davew
Unfortunately we are unable to guarantee full compatibility for this item in your intended application.
Answered by: Dominic
Date published: 2016-03-16

Is this compatible with the Response G5 alarm system. Thanks

Asked by: Mick
I am sorry but the item in question does not support use in your intended application.
Answered by: Dominic
Date published: 2015-11-12

Is this item suitable for external use?
Asked by: h
This is intended for internal use only
Answered by: DM
Date published: 2015-07-17
  • y_2017, m_10, d_21, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_GB, sid_N48CL, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads