Find similar products here

Maplin 30cm White LED Strip

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N46QT


About this product


  • Energy Efficient - low power consumption
  • Bright, vivid colours
  • Compact Design

Product overview

• Energy Efficient - low power consumption
• Bright, vivid colours
• Compact Design
• Easy installation and maintenance free
• Choice of Colours
• Extendable Link - Link two or more strips together

The 30cm long Flexlight band has 18 integrated 2mm SMD LEDs that powerfully light the very last corner of your case with intense light. The 4-Pin Molex connector allows for connection to any PSU and therefore allows installation in just about any PC. Installation is easy and quick and can be done with the glue strip already applied to the backside of the band. This way the Flexlight can be installed inside or outside of the case, wrapped around the reservoir or simply be glued to the bottom of the case to light the inside of the PC. The use of LEDs makes the band extremely power-efficient and cool-running. The Flexlight is also waterproof and can withstand strong shocks. The quality of these bands is absolutely outstanding, which is the reason why they are so versatile and durable!

Rated 2 out of 5 by from Pretty crummy Sure, the light is nice and bright, but that's where the good points end. First, the Molex power connector is *very* flimsy and the pins move around loose, so plugging it in is something of a struggle. Second, the strip gets hot, and as it warms up the adhesive softens until the strip eventually falls off; I've had to secure mine to the inside of the case with electrical tape. Overall, once it's installed it's fine, but this is about as bargain basement as you can get. (And as an aside, there are only three letters in my name, and indeed *many* names, so why do reviews require four?)
Date published: 2017-05-04
Rated 4 out of 5 by from Bright, but not as flexible as it sounds! I bought it this week and installed it, the cable doesn't have actual cable management in mind, and took me a good 20 minutes to wire it into my case through the back. It's nice and bright and durable, the glue doesn't leave residue when u take it off, but wondering how durable the actual glue attached is for re placement, overall a nice touch, would have liked a longer power cable for it however!
Date published: 2016-06-22
  • y_2018, m_2, d_21, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_GB, sid_N46QT, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Says easy to install, yet i plug this into my molex reciever via the cable provided and they don.t come on?? At the moment I am just leaving the black exposed wires out... Is this correct?

Asked by: Boase98
This is correct. if it doesn't turn on it may be a faulty item.
Answered by: Dale
Date published: 2017-05-21

hello I am woulding if I put it in my pc whats to pawer it?

Asked by: kevin
The 4-Pin Molex connector allows for connection to any PSU.
Answered by: Gareth
Date published: 2017-05-12

what voltage rating is ?

Asked by: Arur
This is 12v DC
Answered by: Dominic
Date published: 2017-04-24

Is this mains powered or battery powered?

Asked by: Barry
'The 4-Pin Molex connector allows for connection to any PSU and therefore allows installation in just about any PC' This is operated from a PC powers supply.
Answered by: James
Date published: 2017-01-08

how long is the 4pin molex cable

Asked by: Jack
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below : 0333 400 9500 or email
Answered by: Darren
Date published: 2017-04-23

Good afternoon. I am wanting to use this as a numberplate light. So I just need two wires. If I dis connect the plug on this. Can I just onnect the wires together so as to make a positive and negative?

Asked by: Steve
As much as we would love to be able to help here, as Technical Support Advisors we cannot offer design project advice or assistance, we are more than happy to locate products and support you with your purchases but we are not able to design entire circuits or projects for you. If you do have the design/circuit information detailing the value of the components needed we will be happy to locate these for you.
Answered by: Dominic
Date published: 2016-06-30

I wanted to use these lights to make a light box for drawing. Is there any way I can power it through mains, or does the power have to come through a PC?

Asked by: GPtaz
The strip requires a 12v DC power supply. You could use a mains transformer or LED lighting driver rated at 12V DC output to convert a mains supply if required.
Answered by: Gareth
Date published: 2016-06-21

My question is this: if I can shorten or divide the led, I ask because I'm not sure if they will work.

Asked by: ANDRZEJ
This item can't be cut and has to be used as is.
Answered by: Dominic
Date published: 2016-05-23
  • y_2018, m_2, d_21, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_GB, sid_N46QT, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb