Web only

Find similar products here

MFA Bevelled Gearbox

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N16BQ

£18.99

About this product

Overview

  • Single bevelled gearbox
  • Changes the angle of the shaft by 90 degrees
  • 1:1 input output ratio

Product overview

• Single bevelled gearbox
• Changes the angle of the shaft by 90 degrees
• 1:1 input output ratio
• Includes 5mm shafts

What does a bevelled gearbox do?

The bevelled gearbox changes the direct of the input shaft by 90 degrees allowing you to reduce the size of a project to have components closer to each other. With is 1:1 gears the input power is directly transferred to the output shaft. The gearbox has steel gears, a ballrace and scintered bronze bearing per shaft. The housing moulding is 30% glass filled nylon for strength and has four holes for mounting. The input/output shaft are 5mm in diameter and can be coupled to other shafts or attached directly to gears. Ideal for experiments, hobbies and models.

Specification

Specifications
Type Bevelled gearbox
Manufacturer part code 919D24
Ratio 1:1
Shaft dimensions 5 mm
Outside dimensions 35.5 mm x 35.5 mm (57.3 mm x 57.3 mm including shafts) x 17 mm (23 mm to mounting holes)
Weight 42 g

Would this product be suitable to attach to your 'MFA 4.5-15V Large 148:1 Single Ratio Motor Gearbox' on a shop display which will be running daily for approximately 2 months?

Asked by: Nikos
Unfortunately we are unable to guarantee full compatibility for this item in your intended application.
Answered by: Dominic
Date published: 2015-09-22

What is the maximum torque on the shaft(s) that the gearbox will take (at very low RPM)?

Asked by: IanBJ
Many thanks Russell. The torque info was on the click through 2nd PDF (accessed from link on the one you provided). It might be useful to add the technical data into the Maplin product description or add the 2nd data sheet to the graphics/pictures for the product. Best regards, IanBJ.
Answered by: IanBJ
Date published: 2015-08-17

what are the dimensions of the casing on the MFA Bevelled Gearbox please?

Asked by: Robbie1954
This is best covered in the datasheet, i have emailed you a copy and will add this to the download tab shortly.
Answered by: Russell
Date published: 2015-07-17

which bevel gears will fit this component, i see you sell them for 4mm and 6mm shaft only
Asked by: mr wiggins
This has already got gears in it.
Answered by: JK
Date published: 2015-07-17

Please advise what the weight of this product is.
Asked by: Rob
These are approx 54g.
Answered by: JK
Date published: 2015-07-17
  • y_2017, m_11, d_18, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_GB, sid_N16BQ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads