MRW-210 Super Gainer Antenna with SMA Connector

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N30AC


About this product


  • Transmit frequency: 144-146 & 430-440 MHz
  • Receiving frequency: 25-2000 MHz
  • Length: 40cm

Product overview

• Transmit frequency: 144-146 & 430-440 MHz• Receiving frequency: 25-2000 MHz• Length: 40cm

This replacement hand-held antenna is ideal for scanning & amateur radio enthusiasts. It will improve outgoing and incoming signal quality over long distances compared with standard supplied antennas.

Rated 5 out of 5 by from This thing is tough as old boots and WORKS, I have used it on a variety of Handhelds such as IC-90, FT817, TH-F7, VRX-7, TH-D7, and THD-72E. Also used on a variety of "scanners" it is worth the money paid as it has the build to survive being used when cycling. The extra gain over "stock" antennas is useful.
Date published: 2014-11-11
Rated 3 out of 5 by from Quite heavy for its size and tends to droop slightly under its own weight, but gave me the additional gain I was looking for compared to the shorter antenna supplied with my Kenwood TH-F7 transceiver. Poor value for money
Date published: 2014-11-11
Rated 4 out of 5 by from I bought one of these antennas about 6 months ago, and have used it often since on a Yaesu VX5. I think is is mechanically good. It is flexible enough to protect the SMA connector on the rig from stress, and rigid enough to support itself. Not cheap, but I was pleased to be able to buy one in my local Maplin shop when I needed it.
Date published: 2014-11-11
Rated 5 out of 5 by from Improvement over many manufacturers stock antennas Fitted to a Yaesu FT-2DE and both the receive and the transmit are better than the original supplied aerial. Do take note that SMA connectors are available in two standards, i.e. Male and Female types. This aerial has a Male end, so it will not fit Baofeng transceivers.
Date published: 2015-10-28
Rated 4 out of 5 by from Please note this Antenna will Not Fit Scanner model TTi tsc100r (N20KQ) base diameter just too large but it is a well made bit of kit. You can use a SMA Plug to BNC Socket adaptor (RS85G) and Hand-held Antenna MRW100 (N29AC) instead.
Date published: 2016-06-19
Rated 5 out of 5 by from A very strong reception handheld antenna Well pleased with this little gem, bought one for my ubc125xlt, along with a couple of connection adapters to make it fit, sometimes outperforms my outdoor antenna
Date published: 2016-02-13
Rated 4 out of 5 by from Works better than my old antenna, good range perfect antenna for my scanner, good build and works well
Date published: 2018-02-21
  • y_2018, m_3, d_21, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_GB, sid_N30AC, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

will this work with the mitex general radio?

Asked by: Petem56
This would not be advisable as a replacement as the frequency range does not match that used by the Mitex General model of radio.
Answered by: Gareth
Date published: 2017-08-18

Hello will this antenna fit the intek ar-109 scanner 

Asked by: Maxw
it should do they both have SMA connectors.
Answered by: Les
Date published: 2017-07-20

Can I get an adapter to link this antenna to BNC or pl259

Asked by: Ray 11
SMA to BNC converter can be found here
Answered by: Les
Date published: 2016-11-29

If I live around 15 miles from an airport, will this be able to pick up the frequencies alot better than the stock maycom ar-108 antenna which can hardly pick up the fruencies well unless im closer to the airport?

Asked by: Krei23
Yes this would be an ideal replacement aerial, I can't say for sure if it will enable you to hear airport chatter at that distance as many other factors can affect this (terrain mostly).
Answered by: Les
Date published: 2016-05-19

will these work on a UV-5R BAOFENG Dual Band UHF/VHF 136-174/400-520MHz

Asked by: forgerschoice
No it will NOT work with a Baofeng UV-5R as the Baofeng's SMA connector is male, as-is the connector on the aerial, so it will NOT fit. Sorry.
Answered by: David
Date published: 2016-02-18

I'm just wondering if this antenna would fit a Undien UBC 125 XLT? 

Asked by: Carl
Sorry NO ... the Bearcat is fitted with a BNC aerial connector .. not SMA
Answered by: Les
Date published: 2015-07-17

will this antenna improve reception over existing antenna on a Magellan gps300 airband receiver

Asked by: george
Unfortunately we are unable to guarantee full compatibility for this item in your intended application
Answered by: Dominic
Date published: 2015-07-17

Will it work with a Maycom AR-108?
Asked by: Jonny
this has an SMA connector and works with all units with an SMA connector.
Answered by: TJ
Date published: 2015-07-17
  • y_2018, m_3, d_21, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_GB, sid_N30AC, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb