Network and Telecoms Secondary Outlet

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: ZQ42V

£8.99

About this product

Overview

  • Terminate your network and telephone cabling into one convenient socket
  • Network connection is designed for Cat 5, 5e and 6 wiring standards
  • Suits any twisted pair network standard up to gigabit Ethernet

Product overview

• Terminate your network and telephone cabling into one convenient socket• Network connection is designed for Cat 5, 5e and 6 wiring standards• Suits any twisted pair network standard up to gigabit Ethernet

These great value outlets allow you to terminate your network and telephone cabling into one convenient socket. With versions suited for the home or office, these outlets are ideal for installations where space is at a premium.ZQ42 Pack contains:1x Single gang modular wall plate1x RJ45 Modular Socket1x PABX Secondary Outlet Modular Socket

Rated 1 out of 5 by from This is the KAUDEN SX7072WH/PG cat6/telephone extension. This product is shoddy and unfit for its purpose. The phone socket is mounted on a very thin PCB panel which is fixed only at the centre and flexes as the plug is inserted. A tiny moulded snap in provides inadequate support to the panel so it bends and pops out which causes the shutter to bind. The RJ54 socket has a moulded shell produced from a worn or misaligned tool. This leaves flash around the entry slots for the wires and prevents correct operation of the (professional) push down insertion tool. A site to insert a tiewrap for cable support is provided for the RJ45 connector only. Overall the product is flimsy. What should have been a 20 minute job has cost me a whole afternoon.
Date published: 2012-11-06
Rated 5 out of 5 by from Telecom faceplate actually i found no issue, the telecom module is same as BT style and pretty solid. Worked Ok for me
Date published: 2014-02-02
  • y_2017, m_11, d_21, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_GB, sid_ZQ42V, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

My modem router is upstairs & my secondary phone socket and computer downstairs. Two cables carry the phone line (4 wires) & the network line (8 wires, RJ45) up to the router. I need a flush dual socket outlet wall plate to fix by the router. ZQ42V ?

Asked by: Harry
Unfortunately we are unable to guarantee full compatibility for this item in your intended application, I am sorry for any inconvenience this may cause you.
Answered by: darren cordon
Date published: 2017-10-06

Hi, would either of these products use an RJ11 plug?
Asked by: Lars Grimstvetd
No sorry this product does not support that.
Answered by: LA
Date published: 2015-07-17

Does this product replace the master socket . seperating Voice and ADSL internally?
Asked by: Wayne Pipe
No sorry this product does not support that.
Answered by: JK
Date published: 2015-07-17

Can you also use this with a normal domestic phone line extension (secondary) or does it only work with PABX systems. Thanks
Asked by: Mike Clubbe
Not for house hold telephone systems (almost all household telephones have BT sockets.)
Answered by: PS
Date published: 2015-07-17

I have some Cat7 which I understand is a heavier gauage wire compared with Cat6/5. Can I use this cable with a Cat6 outlet?
Asked by: Steve Bowden
CAT5/6 is generally 8 wire (only 4 used) on the face of it I see no reason why not.
Answered by: PS
Date published: 2015-07-17

do you have to have 2 wires leading to the box
Asked by: martin
yes that is correct
Answered by: DM
Date published: 2015-07-17

Can you explain the colour coded graphic printed on the reverse of the RJ45 plate. There are two diags, yet neither seem to correspond to standard wiring.
Asked by: Richard Selby
For a standard network use the B diagram
Answered by: TJ
Date published: 2015-07-17

Would ''crosstalk'' be a problem if I fed a phone line down the ''spare'' conductors of a Cat6 ethernet connection?
Asked by: David Morris
You will get a certain amount of crosstalk, but whether this will be deterimental to the phone connection depends on the length of cable and the environment it is placed in.
Answered by: GM
Date published: 2015-07-17
  • y_2017, m_11, d_21, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_GB, sid_ZQ42V, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads