Nikkai Pure Connectivity HDMI Right Angled Adapter

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N78NL

£0.90

About this product

Overview

  • HDMI adapter - right angled
  • 270 degrees angle
  • Female input

Product overview

• HDMI adapter - right angled
• 270 degrees angle
• Female input
• Male output
• Great for wall mounted TV's
• Protects current HDMI lead

Severe bends and kinking of HDMI cables can easily cause serious damaging of the internal strands within the cable, resulting in an intermittent signal or even complete signal failure. The use of right angle HDMI adapters can simply and effectively solve this problem in most set-up scenarios. There are two versions the 270 degrees and the 90 degree (N79NL). It all depends on how the HDMI connector is aligned on the back of the TV.

Rated 1 out of 5 by from Disappointed I bought this for a Googlecast dongle. The TV is wall mounted and the position of the horizontal oriented HDMI socket left no room for the dongle to be inserted. Not enough space between the wall and the back of the TV. I bought this to change the orientation to vertical. Unfortunately it appears to be incompatible with the Googlecast dongle and is of no use to me.
Date published: 2016-11-08
Rated 4 out of 5 by from Prompt service A good product with quick and efficient service would use again
Date published: 2016-11-09
  • y_2017, m_12, d_14, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_2
  • loc_en_GB, sid_N78NL, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Do you have a mechanical proprties datasheet as I need to know the dimansions of this connector for use in a piece of equipment I am designing? Thanks

Asked by: Sean _G
I need more specific detail than that as it is going to plug into a vertical PCB mounter male connector and then into a mezzanine PCB. I need to model the whole thing in 3D to determine where the holes in the lower "carrier" PCB need to be. Thanks anyway for the answer.
Answered by: Sean _G
Date published: 2016-09-13

is this 1.4 Version with Ethernet

Asked by: driver21
Yes, I am pleased to advise the item will support this use.
Answered by: Dominic
Date published: 2016-07-21

Will this work with a 4K TV 

Asked by: john
Yes this will work fine.
Answered by: Dominic
Date published: 2016-07-05

are these HDCP 2.2 compliant

Asked by: jozpato
This will work with HDCP 2.2
Answered by: Dominic
Date published: 2016-07-08

Hi, Can someone please tell me the overall length of the male connection side please ? my tv is wall mounted but the wires stick out so I'm looking for thinner solution. Thanks

Asked by: Deano1977
This will stick out by 21.7mm.
Answered by: Dominic
Date published: 2016-01-03

Hello How far from the back of the TV does this protrude.. I have a slim TV that is flat to the wall and do not want the unit to push the TV out Thank you

Asked by: Les V
This will stick out by 21.7mm.
Answered by: Dominic
Date published: 2016-01-03
  • y_2017, m_12, d_14, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_GB, sid_N78NL, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads