Web only

Pro-Iroda Pro-180K 30 – 125W Gas Soldering Iron Kit

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N24ED

£59.99

About this product

Overview

  • 30W to 125W portable gas soldering iron so you can work almost anywhere
  • Heats up in as little as 15 seconds allowing you to get on with the job in hand
  • Temperature set at 450°C allowing you to store heat in the tip to aid the melting process

Product overview

• 30W to 125W portable gas soldering iron so you can work almost anywhere
• Heats up in as little as 15 seconds allowing you to get on with the job in hand
• Temperature set at 450°C allowing you to store heat in the tip to aid the melting process
• Runs for up to 120 minutes when fully refilled with butane

What is included in this kit?
This soldering kit comes with almost everything you need to get started. The kit includes an assortment of heads so you can switch from one to another to suit the job you are doing. It also comes with solder and a tip cleaning sponge to keep your tips nice and clean. The kit also includes a range of tools which is all contained in a heavy duty case to keep everything protected while you store it.

What difference does the wattage make?
The wattage of a soldering iron is one of the most important factors when deciding which one to buy. Higher wattage will deliver more power to the iron’s tip, allowing it to heat up quicker. As this is a variable wattage soldering iron, it heats up the tip in as little as 15 seconds, allowing you to start soldering without having to wait.

Do I need anything else for this soldering iron?
This soldering kit has almost everything you need to get started. To get up and running, all you need is Butane gas

Specification

Specifications
Wattage 30 - 125 W equivalent
Warm up time 15 seconds
Max temp Tip 450 °C; Blow torch 1300 °C
Power Butane
Run time 120 minutes
Special functions Blow torch, hot knife
Weight 680 g
Dimensions 170 x 280 x 49 mm
Package contents
Solderpro 180K
1.6 mm soldering tip
2.4 mm chisel tip
Hot knife tip
Heat blow tip
Deflector
Solder coil
Cleaning sponge
Rugged carry case
1x mini needle nose pliers
1x mini diagonal pliers
1x PLCC puller 10cm
4x sockets: 5, 6, 7 and 8mm
18x 25mm bits: slotted: 5, 6 and 7mm; Torx: T10, T15 and T20, Philips: PH1, PH2 and PH3 Pozi: PZ1, PZ2 and PZ3, Hex: H2,H3,H4,H5,H5.5 and H6
1x storage case

Downloads