Pro-Iroda Solderpro 70W Gas Soldering Iron

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N95AP

£39.99

About this product

Overview

Product overview

• 70W portable gas soldering iron so you can work almost anywhere
• Heats up in as little as 20 seconds allowing you to get on with the job in hand
• Temperature set at 450°C allowing you to store heat in the tip to aid the melting process
• Runs for up to 30 minutes when fully refilled with butane

What makes this iron unique?
This soldering iron is gas powered and temperature controlled to 450°C, helping you get the job done right first time. The iron’s gas chamber can be visually checked so that you can see how much butane is left inside. Its tips can be replaced with others from Pro-Iroda, making this soldering iron versatile in the range of tasks that it can complete.

What difference does the wattage make?
The wattage of a soldering iron is one of the most important factors when deciding which one to buy. Higher wattage will deliver more power to the iron’s tip, allowing it to heat up quicker. As this is a 70W soldering iron, it heats up the tip in as little as 20 seconds, allowing you to start soldering without having to wait.

Do I need anything else for this soldering iron?
This soldering iron is supplied with a preinstalled tip but no other accessories. You will require Butane gas so you can actually use the soldering iron. Lead-free or silver solder is another item that you will require to begin soldering. If you require additional tips, or different tips, take a look at the following Order Codes: N88FA and N88FA

Rated 1 out of 5 by from Just ordered the third one one these while on special. These really are rubbish and don't last long at all,but they are very handy so I buy one when they are on special offer. The problem is that the gas just stops flowing, I striped down the last two to try and find the fault but it just appears to be gas delivery nozzle from the tank gives up and blocks. The most annoying part is that because I don't use it every day, it happens outside the warranty. The very same thing happened to the bigger Pro 120 which costs a lot more even when on offer. Conclusion; if you don't want to keep replacing your gas soldering iron, then don't buy a Solder Pro.
Date published: 2012-12-30
Rated 5 out of 5 by from good if you look after them iv'e had one of these for a good while now and it works fine but there are a couple of things you need to do to keep it in good order. first of all the factory setting for the gas flow is far to high and will burn out the tip quickly you need to reduce the gas flow the same way you would with a clipper lighter by lifting the gas flow adjustment tab off the cog and adjust it so less gas flows second is never tighten the tips just tighten them very gently if you tighten them too much you will ruin the tip when it comes to change for another if you can get it off at all ( they seize in place badly ) so... once you have "adjused" your new iron it will give years of service, mine has and is still going strong new tips are cheap enough to keep it from becoming a throw away item once the tip is ruined and the gas lasts a while, enough for most jobs
Date published: 2014-11-25
Rated 5 out of 5 by from Easy to use and re-fuel blowtorch gives nice flame. The flint part could be a little easier to get sparks but good overall
Date published: 2012-02-24
Rated 5 out of 5 by from Been using this for a few months now, and it's really good quality, as you'd expect from Pro-Iroda.
Date published: 2011-03-09
Rated 5 out of 5 by from Mobile and useful item Purchased the Ј49 kit as a means to see if better than a mains iron. Immediately proved positive and capable of using on more jobs. To the point an excellent item. Well pleased.
Date published: 2014-11-25
Rated 5 out of 5 by from Still going strong after 5+ years I don't solder as much as I used to but even with occasional use It is still going strong. I've had gas soldering irons before that have burnt out and leaked but this one still performs as good as it did when it was new.
Date published: 2017-06-30
Rated 1 out of 5 by from Terrible temp at the tip I bought this thinking it would help when out in the field and needing to repair the quadcopter, in fact the iron makes a very poor effort for any options it has and I will never buy iroda again
Date published: 2016-10-09
Rated 5 out of 5 by from Top Really nice piece of equipment, handy to use , top price
Date published: 2017-08-07
  • y_2017, m_10, d_20, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_GB, sid_N95AP, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Specifications
Wattage 70 W equivalent
Warm up time 20 seconds
Max temp Tip 450 °C; Blow torch 1300 °C
Power Butane
Run time 30 mins
Special functions Blow torch, hot knife
Weight 55 g
Dimensions 102 x 255 x 35 mm
Package contents
Solderpro 70
Cap

Do you stock replacement gas canisters for this product

Asked by: bernie
Unfortunately we do not stock replacement gas canisters for this item.
Answered by: Billy
Date published: 2015-07-17

Is it possible to get replacement tips for this Iroda gas soldering iron? Thanks

Asked by: Jeff
On this occasion Maplin do not stock a product that exactly meets your requirements, or indeed anything close enough to offer you as an alternative.
Answered by: Dominic
Date published: 2015-07-17

Can this iron be used as a blow torch with tip removed ?
Asked by: P Reece
No sorry this product does not support that.
Answered by: DH
Date published: 2015-07-17

Are these gas soldering irons okay for working on PCB''s?
Asked by: Steve
Yes they are.
Answered by: JK
Date published: 2015-07-17

Can this be used to solder sterling silver jump rings for jewellery
Asked by: emma
No sorry this product does not support that.
Answered by: JK
Date published: 2015-07-17

Can the flint be replaced?
Asked by: K Singh
Yes flint can be replaced.
Answered by: PW
Date published: 2015-07-17

will this work silver solder
Asked by: david
Yes the product does support that.
Answered by: CF
Date published: 2015-07-17
  • y_2017, m_10, d_20, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_GB, sid_N95AP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads