Find similar products here

Response miGuard Additional Wireless Pet Friendly PIR Sensor

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A85RZ


Was £29.99

Save £18.99

About this product


Product overview

• PIR sensor that detects intruders through movement
• An area of coverage of eight metres in distance and an angle of 110 degrees for a good distance covered
• Wire free with up to 80m range for a simple and easy installation
• Compatible with Response miGuard A8, A9, A11, G3 and G5 alarm kits

Special feature
• Pet friendly PIR sensor which will ignore a pet that weighs under 25kg
• Automatic temperature compensation and anti-air turbulence technology helps to reduce false alarms due to minor environmental changes

Is this the right PIR sensor for me?
The Reponse miGuard PIR sensor detects the movement of a burglar within an area of eight metres in distance and at an angle of 110 degrees, with the movement activating the alarm system’s siren. In addition, this sensor is great if you have a pet at home that you want to protect. It ignores a pet up to a weight of 25kg, with the sensor not suitable for multiple pets. With 80m wireless operating range away from the control panel you can locate the sensor where it is needed most.

As an added security measure, the sensor also features a tamper switch within the cover. This will activate the alarm if the burglar tries to open up the sensor to remove the batteries inside. With battery life pro-longed due to the power saving mode it features, which puts the sensor to sleep when someone is detected twice and re-activates after three minutes when nobody is detected.

How easy is it to setup this PIR sensor?
This Response miGuard PIR sensor comes supplied with everything that you need to set it up, including all the fixings and batteries. For optimum performance it would be best to locate the PIR sensor 2m above ground level and with the adjustable bracket you can angle the sensor to your desired location. In order to reduce false alarms due to minor environmental changes, the sensor also features automatic temperature compensation and anti-air turbulence technology. This unit is ready to go and easily pairs up with the alarm kits listed below.

Is this wireless PIR sensor compatible with my security system?
This Response miGuard wireless PIR sensor is compatible with the following alarm kits:
Response miGuard A8 Telecommunication Wireless Intruder Alarm Kit A56LQ
Response miGuard A9 Telecommunication Wireless Intruder Alarm Kit A86RZ
Response miGuard A11 Telecommunication Wireless Intruder Alarm Kit A11NZ
Response miGuard G3 SIM Enabled Wireless Intruder Alarm Kit A57LQ
Response miGuard G5 SIM Enabled Wireless Intruder Alarm Kit A58LQ

Rated 4 out of 5 by from The sensor seems to work fine. Just that I had to pair the existing sensors again with the control unit to get that working.
Date published: 2016-11-01
  • y_2017, m_10, d_20, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_A85RZ, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Hi, Just wanted to know how long the batteries are expected to last. I've heard of some sensors lasting a few months and others upto 3 years. Thanks

Asked by: Samm
It can depend how much movement has been detected to how long the batteries will last but they have in built sensor to alert you when battery low: Flashes once every 3 seconds: low battery indication (immediate battery change recommended). If the PIR is connected to a miGuard GSM Alarm System, an SMS alert will automatically be sent to the registered user.
Answered by: Neil G
Date published: 2015-07-30
  • y_2017, m_10, d_20, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_A85RZ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb