Response miGuard AW1 Wi-Fi Wireless Intruder Alarm Kit

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A53UW


About this product


  • Wire-free for a quick and easy installation and setup
  • The kit contains one PIR sensor – and the system is expandable up to 30 sensors and 10 remote controls
  • Connect to your Wi Fi network and receive push notifications if the alarm goes off

Product overview

• Wire-free for a quick and easy installation and setup
• The kit contains one PIR sensor – and the system is expandable up to 30 sensors and 10 remote controls
• Connect to your Wi Fi network and receive push notifications if the alarm goes off
• Long operating range of up to 80 metres
• Part-arm the system for additional flexibility
• High intensity 95 dB siren programmable for up to nine minutes

Special Features
• Arm, disarm, set and monitor your alarm remotely using a smartphone
• Notifications warn you if any of your sensor’s batteries are running low or have been tampered with

Download the app to remotely monitor your miGuard AW1 Alarm Kit


What are the benefit of using an alarm with Wi-Fi?
One of the key benefits of an alarm like the Response miGuard AW1 is that it will notify you whenever your alarm is triggered, no matter where you are. When the AW1 Wi-Fi alarm kit is triggered, it sends a push notification to all connected devices to inform you. Arm, disarm and part-arm your system and set it in up to three zones using the free app on your smart phone, or using the remote controls provided in the kit.

How do the three zones work?
The system can be fully armed or part-armed in home mode. Part-arming can be done by introducing zones to your house – for instance having independent zones for upstairs, downstairs and outdoors. You can program some sensors to switch off while others remain active, and move freely around the home whilst still being secure outside. You can also introduce a 24-hour zone for sensors like smoke or gas detectors, which should never be disarmed.

Is this system easy to set up?
The miGuard AW1 Wi-Fi alarm kit comes with everything you’ll need – including a control box, a pet friendly PIR sensor, a door or window sensor, two remote controls and all of the batteries, fittings and fixings required to start. The sensors run off batteries (included) and send you a notification when the batteries eventually run low. The control panel runs off mains power, but also has an internal backup battery for emergencies and power cuts. The AW1 Alarm Kit can be programed using the app, and then controlled on the app or via the remote controls.

How does wireless connectivity help?
The wireless setup is clean and tidy, easy to install and even easier to use. Connect the control box to your Wi-Fi to start programming and controlling your alarm system from your smartphone. You can use the free app for iOS and Android devices to connect from wherever you are. The system can be expanded by up to 30 sensors and 10 remote controls, which can be used up to 80m from the control box.

Have a look at our range of compatible accessories, and see how you can expand your new security system:
Response miGuard SPS260R Wireless Outdoor Solar Siren Box A60LQ
Response miGuard M102 Additional Wireless Door & Window Contacts A62LQ
Response miGuard RC80 Additional Wireless Key Fob A63LQ
Response miGuard RT101 Wireless Alarm Range Extender A57NB
Response miGuard KP700 Additional Wireless RFID Keypad A54NB
Response miGuard PMR1 Additional Wireless Accessory Pack A58NB
Response miGuard Wireless Outdoor Solar Dummy Siren A84RZ
Response miGuard WI200 Flood Detector A74UT
Response miGuard P700 Ceiling Mounted PIR A78UT
Response miGuard WD80 Vibration Detector A75UT
Response miGuard WS280 Outside Siren A76UT
Response miGuard SOS100 Panic Button A79UT
Response miGuard SMK500 A80UT


Power source
Mains 240V
Battery Yes
Power backup Yes - 3.7V battery
Low battery indicator Yes
Wireless Yes
Frequency 433MHz
Wired No
Cable length 1.5m
Smartphone enabled Yes
RFID tags No
PIR movement Yes
Door / Window Yes
Panic button Optional
Keyfob remote Yes
Smoke detectors Optional
Gas detectors No
Monitoring and alerts
Remote controlled via smartphone App Yes
Manually controlled via control box in the home Yes
Remote controlled via keyfob remote Yes
Push notification alerts Yes
Siren Yes
Siren alert 95dB
Siren duration 9 minutes
Operating Range
Maximum operating range 80m
Transmission frequency 433 MHz
Operating Systems and Protocols
IOS IOS 7.0 or later
Android Android 2.2 of later
Computer N/A
Expandable Yes
Operating Power DC 12V 500mA
Dimensions (of control unit) 151 x 125 x 30 mm
Weight 220g
Battery Type:
for control unit 3.7V 600mAh Li-ion
for sensors and accessories 5 x AA, 2 x CR2025 batteries
Test mode button No
Package contents Control Panel x 1
Power Adaptors x 2
Pet Friendly PIR Sensor x 1
Door / Window Sensor x 1
Remote Control x 2
Installation Manual
All batteries, fixing and fittings

Does the system come with any external house advertising that the house is alarmed? i.e. labeling for doors and windows etc

Asked by: IanW
No, I am sorry but this is not provided.
Answered by: Dominic
Date published: 2016-09-05
  • y_2017, m_11, d_20, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_A53UW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb