Response miGuard AW1 Wi-Fi Wireless Intruder Alarm Kit with Wi-Fi Camera

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A52UW


About this product


Product overview

• Wire-free for a quick and easy installation and setup
• This kit contains one PIR sensor, and the system is expandable up to 30 sensors and 10 remote controls
• Connect to your Wi Fi network and receive push notifications if the alarm goes off
• Long operating range of up to 80 metres
• Part-arm the system for additional flexibility
• High intensity 95dB siren programmable for up to nine minutes

Special Features
• Wireless 720p indoor camera to monitor your homes wherever you are with microSD recording (microSD card not included)
• Arm, disarm, set and monitor your alarm remotely using a smartphone
• Notifications warn you if any of your sensor’s batteries are running low or have been tampered with

Download the app to remotely monitor your miGuard AW1 Alarm Kit


Download the app to remotely monitor your IP116 camera


What are the benefits of using a connected alarm?
This alarm kit will instantly tell you when your alarm goes off, no matter where you are, by sending a push notification to all connected phones. You can monitor and control your alarm on the free app for iOS and Android devices. Using the app, you can connect to your camera through Wi-Fi on your phone and monitor the house – taking snapshots and recordings. You can even listen and talk to those close to the camera with the two-way audio system.

What can the camera do?
Get a great view of what’s going on in your house with the IP116 Wi-Fi camera included in this kit. The camera has a 1280 x 720 pixel resolution and can take 720p video at 30 frames per second. The Wi-Fi camera comes with pan and tilt functions, night vision and two-way audio so you can set up the best see and hear what’s going on wherever you are. The last 20 minutes of footage are recorded automatically and will save over the oldest recording when the microSD card (not included) is full. You can also take and save snapshots using your phone, should you ever need any evidence at hand.

Is this system easy to set up?
The miGuard AW1 Wi-Fi alarm kit comes with everything you’ll need – including a control box, a pet friendly PIR sensor, a door or window sensor, two remote controls and all of the batteries, fittings and fixings required to start. The sensors run off batteries (included) and send you a notification when the batteries eventually run low. The control panel runs off mains power, but also has an internal backup battery for emergencies and power cuts. The AW1 Alarm Kit can be programed using the app, and then controlled on the app or via the remote controls.

How do the zones help?
The system can be fully armed or part-armed in home mode. Part-arming can be done by introducing zones to your house – for instance having independent zones for upstairs, downstairs and outdoors. You can program some sensors to switch off while others remain active, and move freely around the home whilst still being secure outside. You can also introduce a 24-hour zone for sensors like smoke or gas detectors, which should never be disarmed.

How does the wireless system work?
The sensors all pair to the control box included in this kit. This box is the heart of your alarm system, connects to your Wi-Fi network and contains a powerful 95dB alarm. You can expand your kit with up to 30 wireless sensors and 10 remote controls, each of which can be used up to 80m from the control box. Connect directly to your alarm wherever you are with the free app for iOS and Android.

Have a look at our range of compatible accessories, and see how you can expand your new security system:
Response miGuard SPS260R Wireless Outdoor Solar Siren Box A60LQ
Response miGuard M102 Additional Wireless Door & Window Contacts A62LQ
Response miGuard RC80 Additional Wireless Key Fob A63LQ
Response miGuard RT101 Wireless Alarm Range Extender A57NB
Response miGuard KP700 Additional Wireless RFID Keypad A54NB
Response miGuard PMR1 Additional Wireless Accessory Pack A58NB
Response miGuard Wireless Outdoor Solar Dummy Siren A84RZ
Response miGuard WI200 Flood Detector A74UT
Response miGuard P700 Ceiling Mounted PIR A78UT
Response miGuard WD80 Vibration Detector A75UT
Response miGuard WS280 Outside Siren A76UT
Response miGuard SOS100 Panic Button A79UT
Response miGuard SMK500 A80UT


Power source
Mains 240V
Battery Yes
Power backup Yes - 3.7V battery
Low battery indicator Yes
Wireless Yes
Frequency 433MHz
Wired No
Cable length 1.5m
Smartphone enabled Yes
RFID tags No
PIR movement Yes
Door / Window Yes
Panic button Optional
Keyfob remote Yes
Smoke detectors Optional
Gas detectors No
Monitoring and alerts
Remote controlled via smartphone App Yes
Manually controlled via control box in the home Yes
Remote controlled via keyfob remote Yes
Push notification alerts Yes
Siren Yes
Siren alert 95dB
Siren duration 9 minutes
Operating Range
Maximum operating range 80m
Transmission frequency 433 MHz
Camera lens CMOS
Resolution 1280 X 720
IP rated N/A
Night Vision Yes
Video 720p
Video fps 30 fps
One way audio Yes
Two way audio Yes
Field of view 110 deg
Turning angle 360 deg
Pan & tilt function Yes
Recording Yes - microSD card
Camera Power Requirement DC 5V 2A
Camera Power Lead 2.7m MicroUSB
Operating Systems and Protocols
IOS IOS 7.0 or later
Android Android 2.2 of later
Computer N/A
Expandable Yes
Operating Power DC 12V 500mA
Dimensions (of control unit) 150 x 125 x 30 mm
Weight 220g
Battery Type:
for control unit 3.7V 600mAh Li-ion
for sensors and accessories 4 x AA, 2 x CR2025 batteries
Test mode button No
Package contents Control Panel x 1
WiFi Camera x 1
Power Adaptors x 2
Pet Friendly PIR Sensor x 1
Door / Windo Sensor x 1
Remote Control x 2
Installation Manual
All batteries, fixing and fittings

How does the Push Alert system work? No mention in manual.

Asked by: Solpuerto
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email
Answered by: Dominic
Date published: 2017-02-28

I've got three of these, but can only get one at a time to work with the app on the phone, can you please tell me how to set up my app so that I can control all three individually.

Asked by: RobertB
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email
Answered by: Billy
Date published: 2016-07-25

How is the camera powered i.e. mains or battery?

Asked by: Mark
Camera Power Requirement - DC 5V 2A Camera Power Lead - 2.7m MicroUSB
Answered by: Dominic
Date published: 2016-07-22
  • y_2017, m_10, d_23, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_GB, sid_A52UW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb