• High quality green ABS filament
• Compatible with 3D printers that support 1.75mm filament
• ABS is perfect for when a strong and robust printed object is required
• Each reel provides 600g / 240m of filament (approximately)
• Smart reels have built in EEPROM module that can be read by the CEL Robox 3D printer, giving you data on the stored material including amount left on the reelWill this filament work with my 3D Printer?
You can use this filament with any 3D Printer that supports the use of ABS filament with a 1.75mm diameter. You will also need to confirm that if your 3D printer’s spool holder can incorporate the spool diameter of 172mm and the spool hole diameter of 25/80mm. The EEPROM module which allows you to keep track of your usage is compatible with the CEL Robox 3D Printer.
Why choose this filament?
Make sure you don’t run out of 3D printing materials by stocking up on 600g of bright green filament (RBX-ABS-GR499), suitable for medium to large scale projects. If you require a strong and robust 3D printed part, ABS is the choice for you. ABS has a higher melting point so if you’re looking to have your 3D printer used or stored in an area up to 105 °C your print has a vastly reduced change of warping.
The alternative would be PLA, which has a lower melting point, is bio-degradable, made from renewable sources, and does not produce much of an odour.
Check your printer for its filament compatibilities
Storing my filament when not in use
All filaments work better when they stored in a dry and dust free environment, as moisture can create problems with printing and reduce the lifespan of the filament. This filament comes with a reusable zip lock back with an added sachet of silica gel to ensure when you come to use or reuse this filament, you’ll have the best quality print every time.
Ensuring you always have enough for a print
A handy built in EEPROM module stores data on the material and statistics of use which can only be read by the CEL Robox 3D Printer. The EEPROM allows you to determine how much filament is left on the reel, this will allow you to confidently start a print and leave it running without the hassle or returning to a ruined print due to lack of filament. If the 3D printer you are using isn’t the CEL Robox 3D printer, you may still be able to use this filament.