• High quality grey PLA filament
• Will work with 3D printers that support 1.75mm PLA filament
• PLA is perfect for when a detailed and rigid printed object is required
• Each reel provides 600g / 240m of filament (approximately)
• Smart reels have built in EEPROM module that can be read by the CEL Robox 3D printer giving you data on the stored material including amount left on the reelWill this filament work with my 3D Printer?
Any 3D Printer that supports the use of PLA filament with a 1.75mm diameter will be able to use this filament. You will also need to confirm that your 3D printer’s spool holder can incorporate the spool diameter of 172mm and the spool hole diameter of 25/80mm. The EEPROM module which allows you to keep track of your usage is compatible with the CEL Robox 3D Printer.
Why pick this filament?
Don’t risk running out halfway through a project – stock up on 600g of light grey PLA filament (RBX-PLA-FS391) which is suitable for medium to large scale projects.
PLA is a plant based filament which prints with a semi-sweet smell and is bio-degradable. It has a lower melting point than ABS and does not require a heated bed. PLA sticks better to a range of surfaces such as metal, wood, plastic and glass. When actively cooled, PLA can be used for sharper details than ABS
ABS is the alternative for prints that are used or stored in an area up to 105°C. As ABS has a higher melting point, your print has a vastly reduced change of warping. ABS also has more of a bend to give your design more flexibility.
Check your printer for its filament compatibilities
Storing my filament when not in use
All filaments work better when they stored in a dry and dust free environment as moisture can create problems with printing and reduce the lifespan of the filament. This filament comes with a reusable zip lock back with an added sachet of silica gel to ensure when you come to use or reuse this filament, you’ll have the best quality print every time.
Ensuring you always have enough for a print
A handy built-in EEPROM module stores data on the material and statistics of use which can only be read by the CEL Robox 3D Printer. The EEPROM allows you to determine how much filament is left on the reel, which will allow you to confidently start a print and leave it running without the hassle of returning to a ruined print due to lack of filament. If the 3D printer you are using isn’t the CEL Robox 3D printer, you may still be able to use this filament.