Sennheiser XSW-35-GB Wireless Handheld Microphone Kit (License Required)

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N12CE


About this product


Product overview

• 12 pre-set channels between 606MHz and 630MHz* to prevent any interference with any other wireless kits
• Single wireless handheld microphone kit that is ideal for conferences, presentations and interviews
• High band UHF (ultra-high frequency) radio signals so as not to be interfere with by other devices
• Powered from 2 AA batteries (included)
• 6.35mm jack output socket allows it to connect to most mixers, amplifiers and powered speakers
• The supplied microphone is cardioid in design that isolates ambient noise and is resistant to feedback

*Please Note : As this wireless handheld microphone kit can operate on frequencies 606MHz to 614MHz, an individual UHF channel 38 license is required for use within the UK

What makes this kit unique?
This microphone is supplied with a single handheld microphone that is programmed onto an ultra-high frequency range between 606MHz and 630MHz allows you to select a channel to prevent interference with other devices. The receiver is pre-programmed to pick-up from the same channels meaning this kit is ready to go out of the box. The microphone is powered from two AA batteries that are supplied and is easy to set up. Replacement AA batteries are available here.

Why would I choose a wireless microphone?
The wire-free design allows you to go further than you would with a wired microphone and without the cable trailing along the floor. This gives you a greater freedom of movement without getting tangled in the wire making it perfect for presenting to an audience or even singing in a room where cables could cause a hazard.

Will the signals be interfered with?
This microphone kit is programmed with an ultra-high frequency. Cordless telephones, radios and walkie-talkies will not interfere with these microphones when they are in use. This means you can use this wireless microphone without fear of picking up any other signals.

How easy is the microphone and receiver to set up?
This Sennheiser kit is simple to set up. Once you have removed everything from the box, simply install the included AA batteries into the handheld microphone. Plug the receiver into a mains power socket and then connect the receiver to a mixer, amplifier or powered speaker. Once you have set the volume to the perfect level and channel, you are ready to get underway with your event.

Rated 4 out of 5 by from Beginning to be pricey, but seems very reliable, and notably good sound Bought this to replace cheaper 2-mike set getting interference from nearby church. Notably good on low handling noise. Just works, and people use it confidently when it is handed to them.
Date published: 2016-06-30
Rated 5 out of 5 by from Quality Product Having used the mic just a few times I am very pleased with both its performance and build quality.Would recommend.
Date published: 2016-09-02
  • y_2017, m_10, d_22, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_GB, sid_N12CE, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb


Polar pattern Cardioid
Product Style Handheld
Frequency range 606 MHz to 630 MHz
Sensitivity AF Sensitivity; 1,5 mV/Pa
Impedance Not applicable
Mic connector Wireless
Output connectors 6.35 mm
Controls (front) Standby, up button, down button, sync button, set button, volume control
PSU (volts / amps) DC 12 V @ 300 mA
Batteries required 2 x AA batteries
Dimensions 200 x 42 x 127 mm
Net weight 730 g
Package contents
1 EM 10 Stationary Receiver
1 SKM 35 handheld transmitter (dynamic, cardioid)
1 MZQ 1 microphone clip
1 NT 2 power supply unit
2 antennas
2 AA batteries
1 pouch
Instruction manual