Find similar products here

SES (E14) Lampholder

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N24BW


Our delivery options

Free standard delivery (orders over £10)
3-5 working days 9am-5pm
Standard delivery (orders under £10)
3-5 working days 9am-5pm
Next day delivery
Mon - Fri, order by 6pm
From £5.99
Specific day/time delivery
Choose am / pm OR before 9am / 10.30am
From £5.99
Same day delivery with Shutl
Choose a 1 hour time slot
Prices vary

Specific options for this product are available in the checkout. Read more delivery information

About this product


  • SES (E14) lamp holder
  • Porcelain base
  • Screw terminals

Product overview

• SES (E14) lamp holder
• Porcelain base
• Screw terminals


Dia of base: 38mm
Fixing centres: 30mm
Total height: 25mm

How do you wire it. Where does the live, neutral, and earth wires go

Asked by: Bilbo
you connect the live conductor to the terminal that feeds the centre contact, and the neutral conductor to the outer/threaded contact .
Answered by: sparky
Date published: 2017-12-01

What is the external diameter of the bulb holder, not the base of it?

Asked by: Libby
Fixing centres: 30mm
Answered by: darren cordon
Date published: 2017-08-15

which wire goes to which terminal. Where does the earth wire go. Can you send a diagram

Asked by: gareth
The terminals are not polarised nor is the device earthed, typically this item would be for low voltage 12v ses bulb use. The screws on both sides hold a wire to the item. We cannot offer full advice on electrical installations, this job would be best left down To qualified Electricians, if you are at all unsure we would strongly recommend consulting a qualified electrician for help and support or to complete the job for you.
Answered by: Les
Date published: 2017-01-23

Just to confirm. Can this product be wired to a plug and used in the home as a small light source?

Asked by: Simon
No the item has no support for this.
Answered by: Les
Date published: 2017-01-04

HI Is this rated for 240v?

Asked by: Paul
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email
Answered by: Darren
Date published: 2016-09-20

Hi, will this wire straight to mains power

Asked by: Alex
No the item has no support for this.
Answered by: Dominic
Date published: 2016-06-12

How exactly do you wire one of these? Can you send a wiring diagram? I have a two core lead (live & neutral).

Asked by: nicki
The screws on both sides hold a wire to the item.
Answered by: Dominic
Date published: 2016-11-21

hi. would this lamp holder take an ordinary 3.5 bulb. suitable for battery supply. for a dolls house

Asked by: chas
I am pleased to advise the product you mentioned will do exactly what you require.
Answered by: Russell
Date published: 2015-11-26
  • y_2017, m_12, d_13, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_GB, sid_N24BW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb