Find similar products here

Single Universal Satellite LNB

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A13FB


About this product


  • Single output LNB for satellite dishes
  • Input frequency range from 10.70 GHz ~ 12.75 GHz
  • Output frequency range from 950 MHz ~ 2150 MHz

Product overview

• Single output LNB for satellite dishes• Input frequency range from 10.70 GHz ~ 12.75 GHz • Output frequency range from 950 MHz ~ 2150 MHz • Various input frequency range and L.O. for world-wide market • Low phase noise for analogue or digital reception • Voltage-controlled H/V switching (13/18 V) • Excellent D.R.O. stability • Compact tooling • Best solution for individual and multi-satellite systems


Low Band High Band
Input frequency range: 10.7 ~ 11.7 GHz 11.7 ~ 12.75 GHz
Output frequency range: 950 ~ 1950 MHz 1100 ~ 2150 MHz
LO frequency: 9.75 GHz 10.6GHz
Conversion gain: 56 dB (Min.) 56 dB (Max.)
Cross pol. isolation: 22 dB (Min.) 28 dB (Max.)
Noise figure: 0.2 dB (Typ.)
F/D ratio: 0.6
Input reflector type: Offset
Gain flatness: +/- 0.5 dB / 26 MHz
L.O. frequency stability: +/- 1 MHz
(-40°C ~ +60°C) +/- 2 MHz
L.O. Phase Noise: -50 dBc/Hz
(1 KHz offset)
(10 KHz offset) -75 dBc/Hz
(100 KHz offset) -95 dBc/Hz
Image rejection: 40 dB (min.)
Output Vswr: 2.0 : 1 (max)
Output connector: 75Ohm F Type Female
D.C. power supply: 10.5 20.0 V
D.C. power consumption: 120 mA (Max.)
Polar switching voltage: Vertical: 10.5 ~ 14.0 V
Horizontal: 16.0 ~ 20.0 V
Band switching: Low Band: 0kHz
High Band: 22kHz+/-4kHz
Continuous tone signal
Operating temperature: -40°C ~ +60°C

Hi, I live in Aylesbury, Buckinghamshire. Would this LNB be suitable to pick up HELLAS 39 East satellite on an 80cm dish. Correctly aligned of course.

Asked by: Muzza115
Unfortunately we are unable to guarantee full compatibility for this
Answered by: Dominic
Date published: 2017-10-02

Will this work on a Youview box? And sky box?

Asked by: Michela93
As long as the dish is aligned correctly for the Sky signal this should work fine for the Sky box, however as YouView operates via an aerial signal it would not work with a satellite feed. You would need to connect the YouView box to a standard aerial input.
Answered by: Gareth
Date published: 2016-06-28

Is this a suitable replacement for a Fortec Star FSKUVN LNB ?

Asked by: Simon
Yes this product does support this.
Answered by: DaveB
Date published: 2015-07-17

Can this digital Lnb be used for receiving German TV transmissions from the digital transponders of Astra 19.2 E?
Asked by: Jonas
Yes the product does support that.
Answered by: DH
Date published: 2015-07-17

Would this be a suitable replacement for the now obsolete Cambridge G57 LNB?
Asked by: Dave
We cannot see any reason why it shouldn't be.
Answered by: MG
Date published: 2015-07-17

I bought a FORTEC STAR HD Passion system from Maplin. The LNB connection is broken. Would this LNB be a suitable replacement for HD?
Asked by: Tom Johnston
Yes, unless you wanted to future-proof yourself for a twin channel recorder, then you would need at least a Twin LNB. Both are HD compatible
Answered by: MT
Date published: 2015-07-17

Is this Single Universal Satellite LNB suitable for Freesat reception
Asked by: G.B.
yes this unit is fine for use use (with a correctly aligned dish of course) for Freesat reception
Answered by: DM
Date published: 2015-07-17

would this work on Fortec Star 90cm Single Satellite Dish and pick up all sat free to air channels live in telford
Asked by: jason
Yes it would be suitable.
Answered by: TJ
Date published: 2015-07-17
  • y_2018, m_3, d_22, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_GB, sid_A13FB, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb