Find similar products here

Snap-in Illuminated Miniature Round Rocker Switch Red

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N50BW

£3.09

About this product

Overview

Product overview

  • Red Illuminated Miniature Round Rocker snaps-in a 20.4mm hole
  • Features a 2mm wide locating lug
  • Red colour with a SPST contact configuration
  • 4.8mm push-on style terminals can be soldered

An illuminated miniature round faced rocker switch which snaps-in a 20.4mm diameter hole. Body has a 2mm wide locating lug for which a slot must be provided in the edge of the hole, to prevent rotation. Red colour with a SPST contact configuration. Connections are 4.8mm push-on style terminals which can be soldered. Contacts are rated at 10A 125Vac / 6A 250Vac.

Rated 3 out of 5 by from Be aware! Be aware this switch although it has three terminals you would expect that to be 1) live in. 2) switched live out 3) Neutral for the Neon. Well it is. What is odd about this switch is you expect the neon to be between neutral (3) and the the switched live (2). Its not. If you put constant live on 2 and neutral on 3 it wont light up in the off postion. It only lights up in the on postion. There must be a dpst switch inside and one of the switches connects the live side of the neon to the centre tag. Hence in the off postion you cant get the neon to come on
Date published: 2016-01-22
  • y_2017, m_10, d_20, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_N50BW, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

I am looking to switch 2 aquarium pumps through, will these be suitable and will they fit in this enclosure : http://www.maplin.co.uk/p/hylec-apl-pre-punched-control-station-enclosure-greyblack-large-2-holes-box-n42qq

Asked by: Big G
With out any technical specifications of the water pumps it would be impossible for us to say. and unfortunately these would not fit.
Answered by: Billy
Date published: 2017-04-13

There are three pins, how should this be wired to work?
Asked by: Eoin
Hold the switch with the Gold pin at the bottom. The Top pin is the power in, the middle is the switched out, and the bottom is the grounding for the Neon.
Answered by: JK
Date published: 2017-09-21

Will this switch work at 24vdc?
Asked by: G Sayer
No the illumination is Mains Neon.
Answered by: JK
Date published: 2015-07-17

Are these permanently lit or does the light go on/off with the switch?
Asked by: Sam Brett
Depends on how it's wired.
Answered by: GM
Date published: 2017-01-27

As the lamp is Mains rated, is it possible to change it for an LED?
Asked by: Gavin Cliffe
No LED's are low voltage DC not mains AC
Answered by: PS
Date published: 2015-07-17

What are the dimensions to this switch?
Asked by: Norann G
The body is 20.4mm diameter and has a 2mm wide locating lug.
Answered by: JK
Date published: 2015-07-17

How are these switches illuminated ? Are they filament lamps or leds ?
Asked by: Tim Jarrett
filament (neon type not LED)
Answered by: PW
Date published: 2015-07-17

will these lights illuminate from a 12v supply?
Asked by: Michael Spinks
No the illumination is Mains Neon.
Answered by: PS
Date published: 2015-07-17
  • y_2017, m_10, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_GB, sid_N50BW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads