Find similar products here

Snap-in Miniature Round Rocker Switch White

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N82JZ


Delivery Options

Same day with

Prices Vary

Next day delivery Order online by 6pm

£ 5.99

Named day or time delivery

from £ 8.99

Free Standard delivery 3-5 days (on orders over £10)


Standard delivery 3-5 days (on orders under £10)

£ 2.99

See full details of delivery Options

About this product


Product overview

• A range of small round rocker switches
• SPST contact configuration
• Connections are 4.8mm push-on style terminals which can be soldered
• 20.4mm diameter hole and a 2mm wide locating lug
• 6A at 250VAC, 10A at 125VAC
• Is all white, ideal for white goods applications

What depth is the miniature round rocker swith.

Asked by: tech
This can be found in the link
Answered by: Dominic
Date published: 2017-08-10

If my calculations are correct it would make this ok to switch a 100w light bulb at 240v Can you confirm this please?

Asked by: Gavin
We cannot offer full advice on mains electrical installations, this job would be best left down To qualified Electricians, if you are at all unsure we would strongly recommend consulting a qualified electrician for help and support or to complete the job for you.
Answered by: Dominic
Date published: 2017-08-02

Can this be used to control a 12v DC led light for a caravan?

Asked by: Chalvinder
Yes this would be fine.
Answered by: Billy
Date published: 2017-06-03

im looking for a switch just like this but with four terminals on the back ??

Asked by: dougi
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email
Answered by: Billy
Date published: 2017-02-28

Ref my question on 20-07-16 about using this switch in a bathroom cabinet with a 12v lighting system. The info on the 12v side of the tansformer is 11.5v MAX 5A 20-60W. the info on the two lights is rated at 20W. Hope this clarifies my question

Asked by: Franko
Voltage and amps wise this looks to be fine, but the product is still not IP rated so use in a bathroom could cause damage to it ( steam/water ingress )
Answered by: Dominic
Date published: 2016-07-22

Can I use this switch to control 12v lighting circuit in a bathroom cabinet

Asked by: Franko
Unfortunately we are unable to guarantee full compatibility for this item, as this not IP rated and we have no details about the max amps you are going to be using.
Answered by: Dominic
Date published: 2016-07-21

What is the pane cut-out size for this

Asked by: JKehoe
This information is presented in the user guide/datasheet for the device, which can be found on the downloads tab of the product listing. However if you are using a mobile phone or tablet to view our website it may not be visible. To this end I have copied in a link to the electronic version of the instructions below for your convenience.
Answered by: Les
Date published: 2016-05-03

Would this switch be suitable to control a series (4) small LED lights fitted to a plinth. The lights are powered through an LED Driver connected by standard three pin plud to a 24oV supply. The switch - if suitable - would be inserted in the cable on the

Asked by: Rob70
Yes this will work fine in your intended application.
Answered by: Darren
Date published: 2015-10-13
  • y_2017, m_10, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_GB, sid_N82JZ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb