Find similar products here

Splashproof Push Switch DPST

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: RD20W

£3.69

About this product

Overview

  • DP momentary action, circular push-button switch
  • Snap-fit into a 16mm diameter hole in panels 0.7 to 2.5mm
  • Supplied with a waterproof cap and bezel

Product overview

• DP momentary action, circular push-button switch
• Snap-fit into a 16mm diameter hole in panels 0.7 to 2.5mm
• Supplied with a waterproof cap and bezel
• Rated at 3A/250Vac for resistive loads and 1A/250Vac for inductive loads.



What size crimp terminals do I need for this switch

Asked by: David
These are solder terminal.
Answered by: Billy
Date published: 2017-09-14

A previous answer mentioned the white star being lit when pressed: this isn't mentioned in the product description. Does it have a bulb/LED? If so, are there separate terminals for the light? I just want a button that gives a short circuit when pressed.

Asked by: Steve
The switch is NOT illuminated.
Answered by: Les
Date published: 2017-01-27

Could this be used as a starter switch for a starter motor on a car

Asked by: Marty
It is important to note that as a retail only company we are unable to assist with any design projects or queries, or advise on specific products that may be required for your purpose.
Answered by: Dominic
Date published: 2017-11-06

I am wanting to operate two totally separate door bell circuits operating at different voltages (13.5 V and 3 V)using a single bell press. Will the switch code RD20W do the job?
Asked by: Derek McMonagle
Yes the product does support that.
Answered by: DH
Date published: 2015-07-17

can the switch be used single pole?
Asked by: dave
Yes the product does support that.
Answered by: JK
Date published: 2015-07-17

Are the terminals push fit connections or solder?
Asked by: bob
These are solder terminal.
Answered by: JK
Date published: 2015-07-17

can you tell me what is the length of this switch as I am trying to work out how deep a box I would need and the diagram showing dimentions is rarter unclear
Asked by: rob wilks
Approx 30mm
Answered by: JK
Date published: 2015-07-17

Can I use this switch to operate a 1.5 volt ignition circuit on a domestic cooker?
Asked by: peter phillips
Yes the product does support that.
Answered by: JK
Date published: 2015-07-17
  • y_2017, m_11, d_20, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_GB, sid_RD20W, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads