Find similar products here

USB Controlled Robotic Arm Construction Kit

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A37JN

£29.99

Was £54.99

Save £25.00

Delivery Options

Same day with

Prices Vary

Next day delivery Order online by 6pm

£ 5.99

Named day or time delivery

from £ 8.99

Free Standard delivery 3-5 days (on orders over £10)

Free

Standard delivery 3-5 days (on orders under £10)

£ 2.99

See full details of delivery Options

About this product

Overview

  • Build and control your own robotic arm
  • Learn about robotics, modelling and programming
  • Now compatible with Windows 10

Product overview

  • Build and control your own robotic arm
  • Learn about robotics, modelling and programming using computer interfaces
  • Now compatible with Windows 10
  • 149 piece arm, simple to assemble in around two hours
  • USB interface to control your robotic arm with a PC
  • Lifts up to 100g
  • Suitable for children aged 14 and over
  • Exclusive to Maplin
  • Uses four D batteries
  • Compatible with Windows XP, Vista, 7, 8, 8.1 and 10

Now compatible with Windows 10
Click here to download the latest software and drivers for Windows 10. For more information see the manual in the downloads tab.

What can the robotic arm do?
Exclusive to Maplin this fun educational kit contains all the pieces to assemble a working robotic arm, all you will need is a screwdriver, wire cutters and needle nosed pliers. Create your own robotic arm that can pick up and move items up to 100g in weight. This kit is a great introduction to model making and basic programming through computer interfaces for children aged 14+.

How do I control the arm?
The arm can be controlled from your computer using the simple and intuitive software that’s included. Just point your cursor at a part of the arm and scroll or use the on screen control pad to move it. You can either move the arm in real time or programme in a range of motions to be performed later. You can even control your robotic arm through your Raspberry Pi to find out how click here.

How much can my robotic arm move?
Building your robotic arm should take around two hours following the instructions provided. The arm can move through three points of articulation and ends in a clamp to give you maximum flexibility with movement. The arm can move through 120 degrees in the wrist, 300 degrees at the elbow, 180 degrees at the base in the vertical and 270 degrees in the horizontal. The robotic arm also has a reach of approximately 320mm horizontally. The power is provided by four D batteries. (Order Code: L45AL)

Rated 5 out of 5 by from Great kit which went together easily in under 2 hours, minor problem with installing the USB software was resolved by using a different USB port otherwise a superb product with very easy to follow assembly instructions. Poss age of 12+ is a bit low - more agree with the 14+ stated on the box. Tools required are cross head screwdriver, snipe nose pliers and diagonal cutters as stated though I'd add a small file or piece of sandpaper to remove the moulding tags that are left when you snip the pieces off the forms in the kit.
Date published: 2010-07-29
Rated 3 out of 5 by from A bit of fun, not a serious robotic arm. The kit is enjoyable to made and passes a few hours - but be careful, the self tapping screws can easily ream out the mounting posts. The motors are simple motors and the software works on time motors are run, so accurate placement is not always guaranteed. The controlling software is far from intuative and it is best (for once) to actually read the manual! Set up a routine and run it and reverse it a few times and you will end up no where near where you started but then, for the 1/2 price sale cost, what do you expert? A score of average because the image looks good but the proce says differently and the price wins. Fun for kids but not a real robot by any stretch of the imagination.
Date published: 2011-02-15
Rated 5 out of 5 by from I'm very happy with the product. I assembled the kit and got it running in a couple of hours. It's a fun way to learn about how gears and motors work.
Date published: 2011-04-09
Rated 5 out of 5 by from I found the Robotic Arm easy to put together as long as you follow the instructions carefully. The arm will run on 2 rechargeable 'D' cells if they are installed in the left hand side of the battery box. Tracing the red wire from the right hand battery terminal terminates in a solder pad with no tracks to it. Good fun to play with but the software supplied is very basic. There are a few articles on the web using a Raspberry Pi to drive this arm. Pity the battery box wasn't designed so the batteries could be changed without having to unscrew the top off the box as the usb lead has to be pushed to one side to gain access to one of the screws. I think that one of the wires will eventually fracture here as the socket on the end of the USB lead has been changed to a Moles type and a dab of silicon rubber applied to where the wires enter the socket. I have attached a small box to the rear of the battery box containing a battery charging circuit board from Velleman and incorporated a change-over switch to isolate the arm while the batteries are on charge.
Date published: 2013-07-23
Rated 5 out of 5 by from excellent I got this for Christmas took me about a morning to complete few errors easy to fix though. Software easy to use i specifically like the keyboard mode. all over its BRILL
Date published: 2013-12-28
Rated 4 out of 5 by from Excellent I got this product for Christmas it took me 2 hours to build that is quite short for me. Product comes with everything except a screwdriver and a pair of pliers (that I Recommend) Also if you are giving this to a child they might need help doing up the screws
Date published: 2014-02-21
Rated 5 out of 5 by from Brilliant Buy I bought this for my son's 9th birthday and he managed to build this with a little help from hid Dad. It kept him amused for days and thoroughly enjoyed every minute. We have been having stacks of fun since he built it too, setting lots of challenges for each other and timing each other. Great buy for a reasonable price and very well designed.
Date published: 2014-09-09
Rated 1 out of 5 by from Tony Easy put together but very cheaply made. No feedback from motors (not step motors) not even micro switches, this means the gears crunch when moved to far thus won't last long before teeth are knocked of the cogs. As no feedback and not step motors, the programmability of it will be very basic and unable to complete tasks precisely. You get what you pay for so only myself to blame, although the USB interface will come in handy.
Date published: 2014-08-01
Rated 5 out of 5 by from Just wanted to say I had purchaced this product a year ago and it's been great. Though you can imagine how disapointed I was that it stopped working once I got a new computer Win7 64bit. Huge thanks to the review by martyn though with his tip about the download link. It works fantastically well! Cheers martyn - Maplin should give you a job! Now Robot arm is working fantastically once again and my 5yr old daughter is delighted!
Date published: 2012-11-18
Rated 5 out of 5 by from Very pleasantly surprised by this product, being a cynical engineer. The components are well made, went together with no problems, the robot is beautifully designed - and it all worked first time. Even the software loaded easily and worked perfectly on our Windows XP machine. Our 6yr old son, who had it for Christmas, is thrilled to bits and has spent happy hours using it both in basic mode and creating programme sequences. The screen interface is highly intuitive and very helpful. Obviously for the price you don't get a robot which has position feedback sensing systems! So it uses timed actuation in the sequencing mode. To run it in sequence mode without reaching the travel stops (and activating the clutches) you need to make sure you have a known datum point to start from - eg: vertical, centred. Then keep just a little bit away from the ends of the travels whilst setting each movement. Before runnning the sequence, check that the robot has returned to your datum and tweak if necessary. This way it'll be just fine. Obviously, there is a small margin of error in timed acutation vs position sensing, but hey, it's fab and really works!
Date published: 2012-01-03
Rated 5 out of 5 by from Bought this in the sale just before Christmas'10 for 30 pounds. bargain! great education toy and Christmas present for a big kid ;) USB mouse/keboard control is straight forward. Programming is a little more difficult as it has no sensors and simply times how long each motor is turned on and off. Would be fun to modify and hack this to add extra functionality. Build quality is pretty good for the price.
Date published: 2010-12-29
Rated 5 out of 5 by from Really good fun for the price! I bought one of these last week during the offer for £29.95. Construction took a while due to the large number of components. Check and practise the assembly in the manual and everything should be ok. What a disappointment when switching on the computer refused to install the software. I run Windows 8.1 and 10 on my PCs. There is a simple solution that works: its on Google. Press shift and select restart. You will be presented with menus for setting the PC. You need to disable unsigned drivers. Once done you can install and run the software. Have had great fun with my Grandchildren so far, even with the simplicity of control (Time rather than position) Would recommend this item.
Date published: 2015-10-19
Rated 5 out of 5 by from I received this as a novelty present from my Dad. At 33, I'm never too old to appreciate such a toy. I had a lot of fun putting it together, and once I disabled driver signing, it was a doddle getting started with the software/drivers. I immediately set up some macros on my G13 gaming board and played around with it for the rest of the day. It would have been nice to have the option of using a power supply rather than batteries, but this should be relatively easy to rectify for the average user. I've been like a kid playing with this! ^-^
Date published: 2011-12-27
Rated 5 out of 5 by from excellent for the price a great little kit. no feedback so the robots' movements are controlled by operating each motor for a programmed amount of time. so the repeatability is poor. saying that, if you go back to a certain datum point (and fine tune manually) you can repeat tasks. if you want a small robot with feedback get a mitsubishi rv1, and pay Ј5000. for the price, unbeatable.
Date published: 2014-08-25
Rated 5 out of 5 by from Great Xmas present. Took about an hour to put together with some care. Installed software from included CD and used driver for Win7 64bit as mentioned in another review. Only issue I have is that when the software loads the graphics breaks down and buttons become displaced. Will try on another PC/laptop. Anyone else seen this?
Date published: 2011-12-27
Rated 4 out of 5 by from I received this robot arm some time ago and have just assembled it. I works well although its control software is simple. Value for money.
Date published: 2013-05-27
Rated 2 out of 5 by from Don't expect much if you want to program the arm. Programming sets the time a motor runs. There is no feedback/positional stuff so you can't programme 'turn 20 degrees or move 2" etc. No way of re-setting to a 'zero' position except by reversing everything you've done so far. Enjoy as a toy.
Date published: 2011-02-11
Rated 5 out of 5 by from Bought two of these for my kids at xmas and ended up building them for them. Took around 5hrs to build the first and 4.5hrs to build the second one. after building them i put the program on my laptop and found that it would not work as the drivers wouldn't work on my laptop even tho it is compatible so i tested it on my kids laptops and still no luck thy just wouldnt work, after a day of searchinging i managed to find a replacment program with driver that works and now they work great on all computers. This program that i managed to get is exactly the same as the program that is on the disk. Overall my kids love these including myself, My kids now play a game with them and lego racing to move pieces of lego from one spot in to a pot and the first one to move them all wins. There a great time killer and i am happy with the buy hence the driver problems. I dont know if i can post the place where i got the replacment program from that allows it to be played on a 32 and 64bit, i dont know if we are able to post links on here for the replacment program but if maplin wants the link or the downloaded program as i have kept a copy then please feel free to let me know so others can benefit from being able to use the item on all computers. I give this item a top rating...
Date published: 2012-01-24
Rated 5 out of 5 by from I bought this for my son - it took a while to build, but the instructions are nice and clear and easy to follow. Once built, my son found it great fun to control the robot via the laptop, and it's given him a further interest in making more robotic gadgets. First class fun for anyone wanting to get in to a new hobby!
Date published: 2010-10-29
Rated 5 out of 5 by from This is the best arm design i have seenso far!..it contains software to operate which makes its handling very easy
Date published: 2013-08-21
Rated 5 out of 5 by from So impressed, as a design engineer myself, the quality of the components and the final result was superb. It worked correctly first time too! Excellent instruction book. It took some time to build but that was part of the pleasure
Date published: 2010-12-29
Rated 5 out of 5 by from Just finished building this with my 9 year old son. Brilliant! Clear instructions, well made parts - he could do most of it except the small selt-tapping screws which are a bit tight for small hands to put in. Software worked out of the box with Win 7. Nothing to download, no fuss, no bother, just one delighted child. As it should be. Took us about three hours to build carefully. Highly recommended!
Date published: 2013-05-06
Rated 5 out of 5 by from Good product, I had no issues building it, works fine. Note the interface software only work on Windows though.
Date published: 2013-05-27
Rated 5 out of 5 by from Found the Robotic Arm Kit to be of a good quality consruction with good assembly instuctions. Software was easy to install and use. My grandson found it to be very interesting.(You can see a video showing its constuction on UTUBE)
Date published: 2011-04-24
Rated 2 out of 5 by from Problematic to run and annoying The robotic arm seemed to be fine at the beginning, but soon became harder and harder to work with. No screws were labelled clearly, and even after arranging the screws as best as possible, I was still left with and odd screw. Also, the set suggests you use pliers and a screwdriver, neither of which are supplied making building even harder. After the assembly, the drivers failed to work ok my Windows 7 laptop, after plugging the USB into multiple ports and downloading the drivers again and again. This did not work, and all solutions seemed to fail or seem very vague. Overall, I'm very dissatisfied with the product, and am disappointed that the software did not work. The only reason I have given two stars is because the arm was admittedly satisfying to build.
Date published: 2017-01-02
Rated 3 out of 5 by from Nice unit for basic robotics. Assembly by my 15 year old son was done without any problems we soon discovered though, that this unit works simply by recording the length of time any one of 5 motors is active and replaying this sequence. Unfortunatley, with the backlash present here this method does not produce repeatable results, and the programming method is a little primitive and clunky. Lots of fun, but nothing remarkable
Date published: 2009-12-29
Rated 5 out of 5 by from Also works with Win 8, driver signing disabled. Don't know about the a fore mentioned driver download as noticed it after I got it working. I may try it if I install it on my other PC. Great product and fun to put together with my 10 year old. 5 stars at sale price, 4 at current price.
Date published: 2013-03-16
Rated 4 out of 5 by from mark wrighting i got this for my sons birthday easy to build and kept him busy for a while , well worth the money spent
Date published: 2014-03-14
Rated 4 out of 5 by from This was bought for my son aged 10, In just one day he has built the robotic arm as is about to programme it on the pc, a superb piece of kit for teaching basic robotics and programming.
Date published: 2010-12-30
Rated 5 out of 5 by from found this great fun to build with my son and he has had hours of fun with it, money well spent, just dont expect a six axis robot for this kind of money as this as its limitations.
Date published: 2011-01-03
  • y_2017, m_11, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_2, bvpage2n
  • co_hasreviews, tv_3, tr_62
  • loc_en_GB, sid_A37JN, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Specifications
Number of included parts 149
Number of models that can be made 1
What can be made? Robotic arm
Compatible operating system Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 (32-bit only) and Windows 10 (32-bit & 64-bit)
Computer system requirements CPU: Pentium 3 1.0GHz or above
Memory: 256MB or above
Hard drive space: 100MB or above
SVGA 800 x 600 pixels or above
Colour monitor with 16 bit colour or above
Age group, if specified 14+
Power supply requirements 4 x D batteries
Dimensions 228 mm x 161 mm x 381 mm
Max. Lifting Weight 100 g
Box Contents Robotic arm
Software CD
Box Contents

can I download a replacement manuel

Asked by: surplus 6
This can be downloaded from the link below. https://maplindownloads.s3-eu-west-1.amazonaws.com/A37JN-Assembly-10451.pdf
Answered by: darren cordon
Date published: 2017-08-10

I get the error usb device disconnect and empty battery symbol check all the wires still does not work.

Asked by: David
It is not an issue with USB Connection or batteries. I have the same issue - I dug out an old Windows Vista machine - it works fine on that while I get this error on the Windows 10 machine.
Answered by: Alistair
Date published: 2017-07-30

Using Windows 10, latest driver installed, all wiring correct (including the single orange wire), yet still get error message: USB device disconnect + flashing battery symbol. (Maplin, please don't suggest I telephone - I am in Korea). Anyone solved this?

Asked by: 1 character too short
Unforatanly, this system will not allow two-way communication I would advise sending an Email to technical@maplin.co.uk
Answered by: Dominic
Date published: 2017-07-04

It now states that it works with Windows 10. Is there anyway of being able to download the drivers / software? My install CD needs Win XP or a Rasberry

Asked by: Parsnip
Drivers and software for windows 10 have been provided for download on the product listing. The very latest version (16th November 2016) can be downloaded here http://52.50.15.149/Downloads/a37jn-driversoftware16-11-16-10054
Answered by: Billy
Date published: 2017-06-29

the USB keeps on saying it is disconnected and the batteries sign flashes. but we put new batteries in it.

Asked by: kevin
This error typically occurs when the cables in diagram 41 are incorrectly aligned. Please refer to page 23 of the assembly manual and look at diagram 41 and check the orientation of the cable that has 1 single orange wire. https://maplindownloads.s3-eu-west-1.amazonaws.com/A37JN-Assembly-10451.pdf
Answered by: Les
Date published: 2017-06-09

It keeps saying 'usb device disconnect', i have put 4 new duracell batteries in it and it still says this. i have the latest software and it still comes up with this. can someone help me please.

Asked by: samuel
We feel we could best assist you over the phone for this query as we need a little more information, please can you call us on 0333 400 9500 and use the option for Technical Support.
Answered by: James
Date published: 2017-05-24

I purchased a USB Controlled Robotic Arm Construction Kit at Christmas and have installed the up to date software and drivers for windows 10. The drivers have install correctly . When I run the software I get a message saying usb diconnected

Asked by: DarrenC
We feel we could best assist you over the phone for this query as we need a little more information, please can you call us on 0333 400 9500 and use the option for Technical Support.
Answered by: Billy
Date published: 2017-04-16

does the earlier version run on windos10?

Asked by: VIJAY
I am not able to run The Robo Arm on windows 10.It runs on windows XP.
Answered by: VIJAY
Date published: 2017-03-31

I am aware it does not mention mac in the compatibility section but is the USB controlled robotic arm compatible with Mac or is it Windows only?

Asked by: Daveylad
Is it compatible with 64 bit windows 10
Answered by: allg63
Date published: 2017-03-15

I have just bought and made this robotic arm but can I programme it using a raspberry pi?

Asked by: jim0123
Yes, this is compatible with Raspberry Pi
Answered by: James
Date published: 2017-02-27

Operating in windows 10 ,instructions followed digital signing turned off no driver appears to be accepted , robotic arm not recognized, usb connection hesrd on removing usb plug.

Asked by: Frank
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email technical@maplin.co.uk
Answered by: Dale
Date published: 2017-02-20

Same as the other guys, I have just downloaded the latest windows 10 software - elan shows green but USB does not talk to robot - is there something to enable or disable

Asked by: Jhonny107
I can only advise referring to past guides placed in the questions section to see if this helps.
Answered by: Dominic
Date published: 2017-02-19

Can we get a Windows 10 driver that DOESNT turn off some of the critical safety and security features of Windows 10 please? Driver verification and signing is not really something you shoudl silently turn off (the bat file does) for a release product.

Asked by: sambartle
Verification is temporarily turned off for the install of the drivers and software only, it is turned back on when you reboot your system. Once installed the drivers and software function perfectly correctly with driver verification reinstated.
Answered by: Les
Date published: 2017-02-10

Hello, I would like to know if there's a way to work live on the arm, if we insert in it a live feeding USB. Please reply asap because I have a project of around 15 robotic arms combined

Asked by: Salman
Unfortunately we are unable to guarantee full compatibility for this item, as this is not the manner for which it was designed to be used.
Answered by: James
Date published: 2017-01-28

I have bought this and find it great, however is it possible to adapt it for an external PSU?

Asked by: Phil
Unfortunately, Maplin do not advise on product modification as this will void warranty.
Answered by: Dominic
Date published: 2017-01-25

Has anyone actually got this up and running on Windows 10 64-bit? I have downloaded & installed the latest drivers and software, driver signature enforcement is turned off, I've got it in 'test' mode too and its still unrecognised in device manager!

Asked by: ShellyBooPie
I have it running on my laptop w10 64 bit with no problem
Answered by: Phil
Date published: 2017-01-25

I have downloaded the software from your website and have tried to install bunch of times on my computer but each time the following error occurs "Elan USB Instal failed". The computer i used was Windows 8.

Asked by: Rbskl
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email technical@maplin.co.uk
Answered by: Billy
Date published: 2017-01-17

I have downloaded the software from your website and have tried to install a bunch of times on my computer but each time the following error occurs "Elan USB Instal failed". The computers is running on Windows 8

Asked by: Rbskl
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email technical@maplin.co.uk
Answered by: Billy
Date published: 2017-01-17

is it compatible with Macs?

Asked by: TTTTTTT
Compatible operating system Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 (32-bit only) and Windows 10 (32-bit & 64-bit)
Answered by: Dominic
Date published: 2017-01-16

Hello Can it be driven using an Arduino?

Asked by: Grimbler
Whilst this may be possible (Raspberry Pi owners have done this already), Maplin would not be able to provide any information or support on this functionality. A basic web search revealed several web pages where people have managed to control these kind of robot arms with Arduino equipment.
Answered by: Les
Date published: 2017-01-09

My son finished building his robot arm after Christmas and we are extremely dissapointed with the software disc that does not seem to work with his Windows 10 Laptop. Absulutely pointless building this thing if he is unable to use it!! ..Sort it Maplin!!

Asked by: Gaznox2016
This product has been assembled here in the department by one of our technicians and tested on a Windows 10 machine without any problems. Drivers and software for windows 10 have been provided for download on the product listing. The very latest version (16th November 2016) can be downloaded here http://52.50.15.149/Downloads/a37jn-driversoftware16-11-16-10054 make sure that you click the correct .bat file before clicking the install icon. For 64 bit windows 10 click setup_x64.bat then click install.exe For 32 bit windows 10 click setup_x86.bat then click install.exe
Answered by: Les
Date published: 2017-01-06

I have tried to load the latest software from your website on 2 computers running windows 10 64 bit with the same result of no driver loading. I have also tried by disabling the driver signature enforcement without any improvement.

Asked by: Ben72
In order to investigate your issue, we will need to book this item for testing. Once we have the results of those tests, we will update this response.
Answered by: Gareth
Date published: 2017-01-02

Built the arm and downloaded the windows 10 software from the site but it still won't work?  USB device not recognised and can't assign the driver?  Any help would be much appreciated. Thanks

Asked by: Chris
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below : 0333 400 9500 or email technical@maplin.co.uk
Answered by: Darren
Date published: 2017-01-02

I have downloaded the software from your website and have tried to install several times on two different computers but each time the following error occurs "Elan USB Instal failed". The two computers are running Windows 8 & Windows 8.1.

Asked by: JJ27
We are currently testing this issue in our Technical Department as it seems a update to Windows 7, 8 and 10 has caused an issue with the driver, we will update you all as soon as we can.
Answered by: Russell
Date published: 2016-12-29

am i able to use a raspberry pi to control this?

Asked by: Adam
Yes, I can confirm if you follow the guide in the link below this can be controller via raspberry pi; http://www.wikihow.com/Use-a-USB-Robotic-Arm-with-a-Raspberry-Pi-(Maplin)
Answered by: James
Date published: 2016-12-29

can two or more be used on the same computer

Asked by: andrew the geek
Not with the included software no , But third party software and peripherals such as Raspberry pie would allow this to be achieved.
Answered by: Darren
Date published: 2016-12-23

Can I buy the computer interface for the robotic arm on it's own? thanks

Asked by: BPJoe
On this occasion Maplin do not stock a product that exactly meets your requirements, or indeed anything close enough to offer you as an alternative.
Answered by: Dominic
Date published: 2016-12-21

will it work on my chrome book?

Asked by: Nick
No, I am sorry but the item will not work for this use.
Answered by: Dominic
Date published: 2016-12-17

Hi, have tried the windows 10 software but it doesn't work' my computer says no driver installed, can you help please?

Asked by: blobfish
make sure you are installing the driver and software with “driver signature enforcement” disabled. You can find instruction on how to do this here http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/ also make sure you are using the latest version of the drivers and software (dated 16/11/16) http://52.50.15.149/Downloads/a37jn-driversoftware16-11-16-10054
Answered by: Les
Date published: 2016-12-13

I can't seem to find the read me first document in the download section, could I have a link please?

Asked by: Adam
We do not have a link to this Please use the User guide.
Answered by: Dominic
Date published: 2016-11-20
  • y_2017, m_11, d_15, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_141
  • loc_en_GB, sid_A37JN, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads