Wire Stripper and Cutter 125mm

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A19QW


About this product


  • Versatile tool that can cut with one end and strip with the other
  • Stripper self adjusts to wire size
  • Strips soft copper wire size 26AWG - 16AWG

Product overview

• Versatile tool that can cut with one end and strip with the other
• Stripper self adjusts to wire size
• Strips soft copper wire size 26AWG - 16AWG
• 10mm jaw length
• 125mm overall length

Warranty: 5 years

Rated 1 out of 5 by from Not great Bought a little while for PCB work. They've only been used for copper wire and component leads but the blades are already nicked and damaged and don't cut reliably. As others have said, having the combined tools seems a good idea it but doesn't really work in practice, the strippers suddenly snap over and make precision cuts impossible... and the sharp edges are irritating in the hand. Also the strippers often jam on stranded wire Cannot recommend these.
Date published: 2017-09-13
Rated 5 out of 5 by from Robust and compact Does what it claims to do. Nicely designed and comfortable to use.
Date published: 2016-11-09
Rated 3 out of 5 by from Does The Job - But Would Have Been Better As Separate Tools I thought it would be a good idea to buy a combined tool for stripping and snipping. However, there is a bit of a problem with the snipping action. When you snip, you apply pressure and due to the stripper part of the tool it suddenly snips which takes getting use to. Quite a few times I have snipped soldered leads off a little too close or far away. The stripper bit works fine. I just wish I had got individual cutter and stripper tools in the first place. I bought myself a cutter later on and now only use this tool for stripping.
Date published: 2017-05-22
Rated 5 out of 5 by from Great value for money Bought this without any big expectations because it is a cheap tool, but to be fair it works a treat for light duty. I use it for light electronic work and it is faultless for that type of work
Date published: 2016-05-18
  • y_2018, m_3, d_17, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_A19QW, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

What is the thinnest diameter these will cut? I need some that will cut 30 awg

Asked by: Antony
Unfortunately the manufacturers have not specified this information.
Answered by: darren cordon
Date published: 2018-01-09
  • y_2018, m_3, d_17, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_A19QW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb