• Make your blinds automated.
  • Includes remote control.
  • Wireless
  • Suitable for roller blinds up to 160cm wide & 250cm high.
  • Minimum width required 70cm.
  • Compatible with Somfy TaHoma Smart Home.

Control your Home at your Fingertips

With the Somfy Roller Blind DIY Automation Kit (1.6m), you can easily convert your existing roller blind and immediately have all the modern conveniences of electric roller blinds. The kit comes with all the necessary fittings and equipment and instructions to ensure a smooth installation. The motor is also compatible with Somfy TaHoma with all Smart Home capabilities at your fingertips.

Smart Home Integration

Coupled with the Somfy TaHoma Smart Home system, you can operate your roller blinds from home or from a distance, programming times on which your roller blinds will automatically and fully open and close to your personal preferences. You can also simulate your presence when you are away from home. TaHoma enables scenarios, so you can connect your roller blinds with other connected applications in the home. For example, when you leave in the morning, with one push of the button all the lights go out, the heating turned down and the selected roller blinds close.

• The Somfy DIY Automation kit is suitable for roller blinds up to 160cm wide and 250cm high. The minimum width of the existing blind should be 70cm. It is controlled by the included Somfy RTS remote control & can also be linked to the Somfy TaHoma Smart Home system.

What is included?
• 1x Motor Type Somfy Roll Up 28 RTS WF Li-ion.
• 1x Remote Somfy Telis 1.
• 1x Somfy Charger.
• 1x Aluminium tube 1.6m 40mm diameter.
• 2x Brackets.
• 2x Bracket covers.
• 1x Idle end.
• 1x Drive wheel & crown.
• 1x Screws.
• 1x Cutting guide.

Technical Specifications
• Radio Protocol: RTS.
• Radio Frequency: 433.42Mhz.
• Battery capacity: 2600mAh. Built-in Li-ion battery.
• Cable length of charger: 2.5m.
• The number of wires of the cable: 2.
• Battery autonomy: Nominal recharge required, twice a year (based on one cycle (up and down) per day).
• Wire section: AWG24.
• Insulation class: Class III.
• Index protection rating: IP20 – for indoor use only.
• Temperature range (working): 0°C – 60°C.
• Temperature range (storage): -20°C – 60°C.
• Temperature range (charging): 0°C – 45°C.