Corner TV Brackets: How to Find the Perfect Mount for Your Setup

You've got a great room. Comfortable sofa, good lighting, plenty of space — but one problem: your TV doesn't fit neatly on any wall. It ends up wedged into a corner on a stand, facing at an awkward angle, and nobody sitting at either end of the sofa gets a decent view.

Sound familiar? It's one of the most common TV placement problems in UK homes, and the solution is simpler than most people realise. A corner TV bracket is specifically designed to solve this — letting you mount your television in the corner of a room, extend it outward on a swivel arm, and angle it toward your viewers rather than at a single fixed point on the wall.

This guide covers everything you need to know: what makes a corner bracket different from a standard mount, how to choose the right one for your TV and room, and how to get the installation right first time.

Corners are often dead space in a living room. A TV mounted there — on the right bracket — can transform how a room feels and functions:

• Better viewing angles for more seats. A TV mounted centrally on a wall often creates a poor angle for anyone seated to the side. In a corner, with a swivel arm extended and angled toward the room, more of the seating area gets a good sightline.
• More usable wall space. Freeing up a main wall opens it up for other furniture, artwork, or shelving.
• Cleaner, less cluttered look. No bulky stand taking up floor space, and the TV tucks neatly away when not in use.
• Reduced glare. You can angle the screen away from windows more precisely when you control the swivel direction.

The key is choosing a bracket that's actually designed for corner installation — not just any swivel mount bolted into a corner wall.

A standard swivel (or full-motion) bracket mounts flush to a flat wall, with one or two arms that extend and rotate in front of it. That works fine for a standard wall mounting position, but a corner creates a different challenge.

When you mount into a corner, the two wall surfaces meet at 90°. A standard bracket sits perpendicular to whichever wall it's bolted to — meaning the TV will naturally face at 45° to the room rather than straight into it. You're also often working with less stud depth and more limited fixing points.

A dedicated corner TV bracket addresses this with a split-arm design. The two mounting plates attach independently to each wall of the corner (or fix into the corner itself), while the arm extends outward and rotates so the TV can face directly into the room. This gives you:

• A more secure, stable fix across both wall surfaces
• The ability to swivel the screen left or right without the arm fouling the wall
• Better weight distribution across the fixing points

Our ProperAV Full Motion Corner TV Bracket uses exactly this design — split arms that fix into the corner, supporting screens from 23" to 55" with a 45kg weight capacity, and offering 45° of swivel in each direction so you can position the TV wherever your viewing setup demands.

These mount the TV at a set angle — typically facing diagonally into the room from the corner. They're the most affordable option and perfectly fine if everyone in the room sits directly in front of where the TV will face. Not ideal if your seating wraps around or if you need flexibility.

Add the ability to angle the screen up or down, which is useful if the TV is mounted higher than eye level (common in corners where you need to clear furniture). Tilt helps reduce neck strain and glare without adding the full cost of a swivel mechanism.

The most versatile — and the right choice for most corner installations. A swivel arm extends the TV outward from the corner and rotates left or right, letting you adjust the viewing direction depending on where you're seated. The best models also include tilt adjustment.

If you're mounting into a corner specifically because you want flexibility — which is most people — full motion is the way to go. The ProperAV Swing Arm Bracket (37"–70") offers 90° of swivel each way and supports screens up to 35kg, making it a strong option for larger TVs where you want maximum adjustability.

VESA is the standard measurement for the bolt pattern on the back of your TV — the grid of holes used to attach a mount. It's measured in millimetres (width × height), and your bracket must match your TV's VESA pattern.

You'll find your TV's VESA pattern in the manual or manufacturer's spec sheet. Common patterns include 200×200, 400×400, and 600×400. The ProperAV Corner Bracket covers VESA sizes from 200×100 up to 400×400, which handles the vast majority of 23"–55" screens.

Never guess on this one. Check your TV's weight in the spec sheet (or look it up by model number), then choose a bracket rated clearly above that — not just at the limit. A 55" OLED can weigh anywhere from 16kg to 25kg depending on the model, while a budget 55" LED may come in lighter. Always factor in a safety margin.

Brackets are rated for a screen size range as well as a VESA range. Both need to match your TV. A bracket rated for 23"–55" won't be correctly proportioned for a 65" screen even if the VESA bolts technically line up.

Corner installations often mean working with two different wall surfaces — both need to be suitable for fixing. Solid masonry (brick or block) is ideal. Stud walls are fine but you'll need to hit studs for a secure fix. Plasterboard-only fixings aren't appropriate for TV mounts — always anchor into the structural material behind.

In a corner, you're often working in a confined space, so check the bracket's arm extension length and make sure you have enough room to extend and tilt the TV without it catching the wall or ceiling cornice.

This is where corner mounting lives or dies. A common mistake is focusing on where the TV sits rather than where it points — get the angle wrong and you've gained nothing over a stand.

A few principles for corner TV placement:

• Aim for eye level when seated. The centre of the screen should be roughly at eye height when you're on the sofa — typically 100–120cm from the floor for most seating arrangements. If the corner forces the TV higher, tilt it downward to compensate.
• Swivel toward the primary seating position. If most of your viewing happens from one spot (a sofa directly opposite), angle the TV toward that. If your room is more open-plan with seating at multiple angles, choose a full-motion bracket so you can adjust as needed.
• Account for screen size and viewing distance. A larger screen needs more distance to be comfortable. For a 55" TV, a minimum viewing distance of around 1.4 metres is recommended (closer if it's a 4K set). Make sure the arm extension reaches far enough into the room.
• Check for glare sources. Before drilling, hold the TV (or a flat piece of card the same size) in position and look at it from each seating position at different times of day. Corner positions sometimes create unexpected glare from windows you hadn't considered.

Swivel range is quoted as degrees of rotation from the centre. A bracket with 45° left and 45° right gives you 90° of total arc — enough to sweep from facing one wall to facing the other in a standard corner.

For most living room setups, 45° each way is sufficient. If you're mounting in an open-plan space where viewers might be seated at very wide angles, look for 90° each way — our ProperAV Hydraulic Swing Arm Bracket (23"–55", 23kg) delivers exactly that, with gas-spring-assisted movement that makes repositioning smooth and effortless.

Also consider arm extension — how far the TV can project outward from the wall. More extension means you can swing the TV further into the room without the edge catching the corner wall. This is especially important for wider screens where the edge of the TV might otherwise foul the wall surface as you swivel.

A corner installation is slightly more involved than a standard wall mount. Take your time with the following steps:

1. Find your fixing points first. In a corner, you'll likely be fixing into two adjacent walls. Use a stud finder on stud walls. On masonry, any point is solid, but aim for consistent height on both sides for a level mount.
2. Check for pipes and cables. Use a cable/pipe detector before drilling anywhere. Corner walls near sockets or near where plumbing runs vertically are particularly risky.
3. Mark and level carefully. Most corner brackets have split mounting plates — attach one side first, use a spirit level to mark the second side at exactly the same height, then drill. Getting this right at the start saves a lot of adjustment later.
4. Use the right fixings for the wall. For masonry, use the included wall plugs and bolts or appropriate alternatives rated for the TV's weight. On stud walls, always screw into the timber stud — never rely on plasterboard anchors alone for a TV mount.
5. Don't overtighten the VESA bolts. Snug is fine. Overtightening can stress the mounting points on the TV's rear panel.
6. Cable management as you go. Thread cables through any built-in clips or conduits on the bracket before the TV goes on. It's much harder to tidy cables once the screen is in place. For a completely clean finish, consider running cables through the wall with a cable tidy kit.
7. Get a second person involved. Particularly for larger screens, having someone hold the TV while you attach it to the bracket makes the job significantly safer and easier.

Here's a quick reference for choosing the right bracket from our range:

• Best dedicated corner mount (23"–55"): ProperAV Full Motion Corner TV Bracket — Split-arm corner design, 45kg capacity, 45° swivel each way, VESA up to 400×400. The right tool for the job if you're specifically solving the corner problem.
• Best for larger screens (37"–70"): ProperAV Swing Arm Bracket (37"–70") — 35kg capacity, 90° swivel, VESA up to 600×400. Ideal for bigger living rooms where the screen size demands more reach.
• Best for smooth movement (23"–55"): ProperAV Hydraulic Swing Arm Bracket — Gas-spring mechanism for effortless repositioning, 90° swivel, 23kg capacity.
• Best for smaller screens (23"–43"): ProperAV Premium Swing Arm Bracket (23"–43") — Lightweight aluminium construction, 15kg capacity, 90° swivel.