APsystems Y3 2.5mm H07 UK Power Cord

About this product
Through this APsystems Y3 2.5mm H07 UK Power Cord (not included with microinverter), an EZ1 series microinverter could be plugged into a socket and start outputting energy, for a truly easy and convenient grid connection.
Disclaimer
This product must be installed and connected in accordance with the manufacturer's instructions and current UK electrical regulations (including BS 7671). The AC connection to your home's electricity supply should be carried out by a qualified, registered electrician using a dedicated circuit. Before the system is connected to the grid, you (or your electrician) must notify your Distribution Network Operator (DNO) under the G98 process. Total plug-in/balcony solar generation at any one property must not exceed 800W. Rules on connecting this type of system directly via a standard socket are changing and, at the time of listing, are not yet fully in force — please check the latest government and DNO guidance before installation.
Actual power output will vary depending on sunlight levels, panel positioning, shading, weather conditions and time of year; the 800W rating is a maximum/peak figure, not a guaranteed continuous output.
This is an electrical product. Incorrect installation or use may result in electric shock, fire, or damage to your property's electrical system. Keep out of reach of children. Do not attempt installation if you are unsure of the requirements — consult a qualified electrician.
Product specifications, images and compliance information are provided by the manufacturer and are correct to the best of our knowledge at the time of publication, but may be subject to change. Maplin accepts no liability for loss, damage or injury arising from improper installation, use, or failure to comply with applicable electrical or grid-connection regulations.
Questions & Answers
Reviews
- Choosing a selection results in a full page refresh.



